Enki,
The Goflex Net arc Number is:
3089 Seagate Goflex Net
So at Debian command line, set it
fw_setenv arcNumber 3089
And reboot.
However, it's best to that you try either UART booting or netconsole first before changing uBoot envs (because a typo would lock you out of the box).
Addendum:
To setup netconsole: http://forum.doozan.com/read.php?3,14
But if you already have working serial console as before, then go ahead with setting arcNumber.
The Goflex Net arc Number is:
3089 Seagate Goflex Net
So at Debian command line, set it
fw_setenv arcNumber 3089
And reboot.
However, it's best to that you try either UART booting or netconsole first before changing uBoot envs (because a typo would lock you out of the box).
Addendum:
To setup netconsole: http://forum.doozan.com/read.php?3,14
But if you already have working serial console as before, then go ahead with setting arcNumber.