bodhi, your image's format was not recognized by tar both on my VM and on the goflexhome
so I couldn't install the image on the prepared stick.
I used a third stick (which used to work well as a rescue system) with Jeff's script, but after it asked for
a reboot the original system was launched. During launch (both cold and warm start) the LED of the stick
didn't flash, as it seems, the USB-stick is not being accessed as first boot device presently.
I looked up the fw_printenv of the running goflexhome OS, maybe this can help:
bash-3.2# fw_printenv
Warning: Bad CRC, using default environment
bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm
bootdelay=5
baudrate=115200
so I couldn't install the image on the prepared stick.
I used a third stick (which used to work well as a rescue system) with Jeff's script, but after it asked for
a reboot the original system was launched. During launch (both cold and warm start) the LED of the stick
didn't flash, as it seems, the USB-stick is not being accessed as first boot device presently.
I looked up the fw_printenv of the running goflexhome OS, maybe this can help:
bash-3.2# fw_printenv
Warning: Bad CRC, using default environment
bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm
bootdelay=5
baudrate=115200