Re: Pogoplug v2 Uboot woes

I'm not sure, I've only ever followed these instructions in order to install uboot and arch - http://archlinuxarm.org/platforms/armv5/pogoplug-v2-pinkgray

When I look at the USB drive, I get:

sudo sfdisk -l /dev/sdb

Disk /dev/sdb: 1018 cylinders, 125 heads, 62 sectors/track
Units = cylinders of 3968000 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/sdb1          0+   1017    1018-   3944719    7  HPFS/NTFS/exFAT
/dev/sdb2          0       -       0          0    0  Empty
/dev/sdb3          0       -       0          0    0  Empty
/dev/sdb4          0       -       0          0    0  Empty

Shouldn't those other partitions be populated, as in one of those being my rootfs?

On the USB drive, my /boot/ only contains uImage, no uInitrd