This is the reply to bodhis message: http://forum.doozan.com/read.php?2,16044,16830#msg-16830
@bodhi,
I have compiled the uboot with ext4 configuration successfully. The u-boot-spl.bin file can be loaded. Until now I don't have the right partition structure so that the primary loader can't load the u-boot.img. I just wanted to get you a fast feedback for the new ox820.c file.
@bodhi,
I have compiled the uboot with ext4 configuration successfully. The u-boot-spl.bin file can be loaded. Until now I don't have the right partition structure so that the primary loader can't load the u-boot.img. I just wanted to get you a fast feedback for the new ox820.c file.
U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 10:18:57) Boot device: SATA Attempting to set PLLA to 800 MHz ... plla_ctrl0 : 0000030a plla_ctrl1 : 00400000 plla_ctrl2 : 007f0068 plla_ctrl3 : 00000193 PLLA Set Bus 0: OK Device 0: Failed to mount ext2 filesystem...-shv