Re: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Heychrist, 1. Yes. That's the idea. Use 2nd Hdd or a Usb thumb. But dont copy the live system. Should be a tar back up. Why do you need debootstrap? I thought you already have Stora kernel 3.9.x? But...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Write of ~20-25MB/s Read of ~40MB/s Those sound about right.
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
I tried GPT but wasn't able to boot. I'd like to build my own rootFS someday.. in my sparetime. For now... I used Gdisk to create /dev/sdb1 and a swap sdb2 I formated /dev/sdb1 with mkfs.ext4 and...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
I noticed something else interesting. I tried loading to a SSD with MBR. I follow the same steps above. On boot It started, but errored out. [ 13.554904] ata1: SATA max UDMA/133 irq 21 [ 13.559023]...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
heychris, The behavior is expected. With 2 SATA ports, you will need rootfs label to boot, just like for the usb root usb_root=LABEL=rootfs So if you label one disk rootfs, and set your bootargs to...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo E02
WorldwoWires Wrote: ------------------------------------------------------- > The other two units I > updated do not exhibit this behavior. Do these have the same u-Boot? if they do, then for...
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
twinclouds, Not exactly to your question, but this thread from davygravy contains a wealth of information re wifi: http://forum.doozan.com/read.php?2,6300
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
WarheadsSE, I did not see any comments on my GitHub?!!! Update: OK. I saw your comments in my email. Will respond there.
View ArticleRe: dpf-ax: unsupported dpf - requests
Hello Superelchi My DPF is SWEEX 1.5'' DIGITAL PHOTO KEY CHAIN MM004V5 root@raspberrypi:/home/pi/Desktop/marco/dpf-ax/tools# python identify.py dpf_dump.bin Looking for firmware.............: Found...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
If I did not mention it before, there were NO errors updating any of these units. The unit that hangs was NOT running UBIT before installing the new u-Boot. The previous version was U-Boot 2011.12...
View ArticleRe: Restore Pogoplug E02
So I received my serial items and this is what i get on the one that won't boot : U-Boot 1.1.4 (Jul 16 2009 - 21:02:16) Cloud Engines (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60...
View ArticleRe: PogoPlug E02 Black
Looks like this stock uboot does not have usb command. And as WarheadsSE said, rootfs in Nand was corrupted. You have 2 choices, either: 1. Try to restore rootfs with a backup dump, from a good unit....
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
WorldwoWires, I am not sure what you are trying to do? why saveenv in netconsole prompt? can you boot with USB into debian with this box? if you can then do fw_setenv inside Debian, would that work?...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Thanks again for the reply. Before doing anything further, this is the GFH environment as it stands currently: Current u-Boot: U-Boot 2013.10 (Feb 21 2014 - 19:48:46)-tld-2 Current u-Boot Environment:...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
It seems that I am not alone with this issue. http://archlinuxarm.org/forum/viewtopic.php?f=23&t=6532 my transfer speeds are.. Read of ~20-25MB/s Write of ~20-25MB/s The only difference to Fma965...
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi: Thanks. The post you referenced is for a specific wifi adapter that I don't have and it is for make the Dockstar to be a AP, different from what I need. I am able to install what needed for my...
View Article