Dump flash contents through u-boot
Hi guys, I've got a goflex net which I've recently had to recover and whilst I had some dumps, I've no idea of their origin as my original ones proved corrupt. I've also got a 2nd goflex net which is...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
> Can you get the numbers for USB drives (before and > after), too? On stock FW I used none usb drive. Now with debian and arch I am using one 4GB usb flash drive on the back panel for booting...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
It works with all the drives I was testing... Problem is I only have a Pogoplug Mobile with SATA cable soldered. Power is always drawn through USB as I didn't have a SATA power connector to solder...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
ebbes Wrote: ------------------------------------------------------- > Please test the uboot in attachment, it has > timeout increased to 20000 µs and prints (very > few) debug messages. The...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Okay, I tried to change the initialization sequence to more closely match Marvell U-Boot. Please try this file. But if you don't feel like the drive is rotating, then maybe staggered spin-up is still...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
ebbes Wrote: ------------------------------------------------------- > Okay, I tried to change the initialization > sequence to more closely match Marvell U-Boot. > Please try this file. >...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Okay, not cool. One more thing you could try: Power on the Pogoplug (or complete UART booting) without the hard drive attached. Once you are at the Pogo4> prompt, plug the hard drive in and try ide...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
ebbes, > u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */ I've tried different numbers from 25 to 100ms. It had no effect. > then some GPIO would have to be written to...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
bodhi Wrote: ------------------------------------------------------- > > bodhi, could you please test your failing drive > > inside your eSata-box? > I've tried this. The drive in eSata...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Hi ebbes, > Sorry, I don't quite understand what's exactly > going on: Does your drive work in external drive > but not when plugged in directly or does it work > either way? I did the...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Okay, so this is definitely some kind of power issue. My drive and markweng's drive are actually the same model (except for revision) and your drive is obviously the same (is it spinning at all? Could...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
I agreed. It seems to be a power issue, because leaving it in the slot while booting UART, it does not spin at all. And I also did try (once), to plug the GoFlex drive in while at U-Boot prompt, and...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Okay, gonna be fun digging in the driver. Somehow sata power has to be enabled... See my last post's edit (your post was not yet there when I started editing :D).
View ArticleRe: exportfs: /anyfolder does not support NFS export
share is visible ...but not accessible ? CLIENT## mount -t nfs <NAS_IP>:/usr/src /test mount.nfs: access denied by server while mounting <NAS_IP>:/usr/src CLIENT# showmount -e...
View ArticleRe: exportfs: /anyfolder does not support NFS export
CLIENT# mount -vvvv -t nfs IP_NAS:/usr/src a mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0...
View ArticleRe: [Pogoplug Series 4] Booting Debian with Arch Linux ARM uBoot
Got it. I found the correct package on Arch to get the command and was able to create the files. Unfortunately I must have messed something up and cannot boot either Debian or Arch. I ordered a SATA...
View ArticleRe: exportfs: /anyfolder does not support NFS export
GOT IT !!!!!! You were right ... ignore error message from exportfs, and just try to mount from client side .... BUT ... very important FORCE TO NFS3 (NFS4 doesnt work yet ... of course it has got...
View ArticleRe: exportfs: /anyfolder does not support NFS export
marcint43, Congrats! Concur. I think this exportfs error message was a terrible error message, a lazy way to report a warning :))
View ArticleRe: exportfs: /anyfolder does not support NFS export
next caveat: /usr/src2 *(rw,sync,no_root_squash,no_subtree_check,insecure) asterisk is not working. There is need to be directly entered ip or ip/netmask.
View ArticlePogoPlug E02 - Connect USB Modem -WebCam and DVB-T
Dears I have got PogoPlug E02 and finally after many problem i have installed Debian with Help of bodhi . Now i can FTP and download-upload the HDD normally and after some tried i have successfully...
View Article