Re: root password not working FreeAgent GoFlex Home
I know the cable is good because it's usually connected to my raspberry pi which is connected to my TV as a set top box and I use it constantly. I've reimaged a different USB drive twice and tried on...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Been there; done that. I've stopped and restarted kwboot *many* times while the stora was stuck in this frozen state. I originally broke into the NSA320 using kwboot to load another uboot. It only...
View ArticleRe: 2014.01 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Val532, Here is the u-boot image for the Lacie D2Net_V2. uboot.2014.01-tld-1.d2net_v2.bodhi.tar md5: 7cbefcb8042c4fdc7711deefa846a97f I don't have the Lacie, so cannot test it. So please do not flash...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
kraqh3d , Bummer! I wonder what is the difference between your Stora and heychrist's Stora, could it be the boot ROM version?. And have you tried booting with stock U-Boot, and the basic 3.14.0-tld-1...
View ArticleRe: 2014.01 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
@bodhi Thanks, i will test it this week-end, and when it's done i will post the result.
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
This stinks. I really want to safely test out your 2014.01 u-boot. I hope heychris pokes in soon and can respond. I'm very curious what he did. It could be a difference in the bootRom version. It seem...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
kraqh3d, Yes, the Stora is in addition to all other Kirkwood plugs. Aggree, I would boot the NSA320 with a pristine rootfs 3.14.0-tld-1 on USB, upgrade it to tld-2 kernel, and take the USB to the...
View ArticleRe: 2014.01 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Can someone confirm that netconsole is working in uboot.2014.01-tld-1.dockstar? I can't seem to get it to work. I have three dockstars, two running a 2011 daveygravey uboot and the third recently...
View ArticleRe: Booting Debian on Pogoplug Pro
thank you loads, it's true, with ext4 it works. for anyone else stumbling about this, you might need to change your root partition from ext3 to ext4 by running: tune2fs -O extents,uninit_bg,dir_index...
View ArticleRe: 2014.01 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Hi laprjns, netconsole does work in uboot.2014.01-tld-1 for dockstar. Is there anything peculiar about the 3rd setup hardware-wise, e.g. bridge, switch...? To look at u-boot version without serial...
View ArticleRe: Booting Debian on Pogoplug Pro
thanks, ingmar, for your directly usable 2.6.32 kernel sources. It was very straightforward to compile the sound modules. If anybody wants working usb audio on classic they can use ingmar's...
View ArticleRe: Bodhi Debian and SanDisk ReadyCache
This is encouraging. On a whim, I plugged the Sandisk ReadyCache into the Pogo V4 booting with stock Marvell/ALARM U-Boot, and it recognized the disk and booted without problem! U-Boot 1.1.4 (Jan 13...
View ArticleRe: Booting Debian on Pogoplug Pro
@clge: Can you please provide your configuration file? You can establish IPv4 connection to your IPv6 server with http://cloudflare.com -> HowTo: http://forum.lowendspirit.com/viewtopic.php?id=441....
View ArticleRe: Booting Debian on Pogoplug Pro
I changed my config since then to add some usb wireless modules (which sadly didn't work, i guess the kernel is a bit too old). But here it is:...
View ArticleRe: Booting Debian on Pogoplug Pro
You can get a free domain from http://www.dot.tk/ or http://www.freenom.com/. IPv4 config download: http://pogoplug.cwsurf.de/modules-sound-2.6.32-ppv3-classic-zram-1.1.config Alternatively you could...
View ArticleRe: Booting Debian on Pogoplug Pro
wow, now i can recommend this to all other people that have ipv6 at home, it works fine if you know how to set it up (when you register a .tk domain you have to put some random working address in...
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Kernel linux-3.14.0-kirkwood-tld-2 package was uploaded. Please see 1st post for download link.
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hello! My NSA310S on this kernel doesn't power off completly, only HDD turned off but rest of device is still on. How fix it ?
View ArticleRe: Booting Debian on Pogoplug Pro
To clarify this a bit further: I was wondering if 5MB isn't a bit high. My thought was that it should be possible to load the kernel at a lower address, which could lead to a few more MB of useable...
View Article