Re: dpf-ax: unsupported dpf - requests
@CHGXRXJJ Looking for firmware.............: Found (buildwin, 240x320 px). Looking for Openwin..............: Found. Looking for LcdIniTbl............: Found. Looking for backlight & contrast.:...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hi, superelchi, I got your message, you are prompted when I use the firmware you sent me: FLASH models can not match, please re-determined! The firmware and Models supported by dpf-ax you listed in a...
View ArticleRe: New uboot and kernel for Pogoplug v3/Pro
tilator, I will upload the kernel and create a new thread for kernel and rootfs in Debian section (later today).
View ArticleLinux Kernel 3.12.13 Pogo V3 (Oxnas OX820) package and rootfs (Flattened...
My latest FDT kernel package and rootfs for Pogoplug Pro V3 (with PCI). With this kernel we can run the Pogo Pro V3 boxes with either old U-Boot version (stock U-Boot and its variants) or the latest...
View ArticleRe: New uboot and kernel for Pogoplug v3/Pro
I've created a new thread for this kernel: http://forum.doozan.com/read.php?2,16044
View ArticleRe: Ox820 device tree
> Let us know your progress. Since you wanted to know: Kernel 3.13.5 registers second SCSI host. Something is still wrong since both are at same address....
View ArticleRe: dpf-ax: unsupported dpf - requests
Flash size does not really matter, because dpf-ax only uses a small part of the flash. For your flash (a 25Q80) you need a newer FlashLib.ini (attached). Replace the existing one in the same dir...
View ArticleRe: Ox820 device tree
Try this kernel I've just uploaded: http://forum.doozan.com/read.php?2,16044 The /proc/device-tree does polulate correctly.
View ArticleRe: dpf-ax: unsupported dpf - requests
@superelchi This success, Works perfect! Thank you very much for your help! Thanks again ! :-) CHGXRXJJ
View Articleapt-get upgrade does not work :
Hi all, i am facing an issue while upgrading my debian on a Dockstar. apt-get upgrade -y Lecture des listes de paquets... Fait Construction de l'arbre des dépendances Lecture des informations...
View ArticleRe: Ox820 device tree
bodhi Wrote: ------------------------------------------------------- > Try this kernel I've just uploaded: > http://forum.doozan.com/read.php?2,16044 > > The /proc/device-tree does...
View ArticleRe: Ox820 device tree
tilator, Quote> It seems to me like the whole trouble comes from > the device tree. I suppose SATA_OXNAS_MAX_PORTS = > 1 setting in kernel sata_oxnas.c file is hard > coded solely because...
View ArticleRe: Ox820 device tree
tilator, Quote> BTW: I took a look at your kernel. My device does > not have PCI and it will not boot with PCI enabled > kernel. If you can compile it without PCI support > I can give it a...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
@WarheadsSE, Whenever you're ready, I'd like to pull in the NSA3xx.
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
davidedg Wrote: ------------------------------------------------------- > bodhi, > > I've used your kernel patches to derive a minimal > compiling config. > It gave me some problems...
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
DavideDG, It does not ring a bell! it is strange that your initramfs would look for the kernel in NAND. I think that's where the stock kernel resides? if it looks for mtdblock6 then it would not be...
View ArticleRe: Ox820 device tree
> You could try to boot with this attached dtb. I > think it should work with the Pogo V3 Classic, > even booting the full Pogo Pro kernel, since it > does not have pci controller in it....
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > It does not ring a bell! it is strange that your initramfs would look for the kernel in NAND. I think that's where the stock...
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Found the error, I had CONFIG_MTD_BLOCK=y Confirmed also by this: if I use your kernel, initrd and rootfs and I modprobe mtdblock, it gives same errors. Now I have another problem, always using...
View ArticleRe: Linux Kernel 3.14.0 Kirkwood package and rootfs (Non Flattened Device Tree)
DavideDG, Others have not reported seeing the error with sensor in their NSA325. I think it is best to post in this thread: http://forum.doozan.com/read.php?2,14351
View Article