Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
Hi bodhi, I got the below in netconsole Quote U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45) Pogoplug V4 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found...
View ArticleRe: Pogoplug v4 / mobile on bodhi's latest build wont start linux
bodhi, So I got it working!!! I looked at the /var/log folder and found it was booting the kernel and logging to dmesg and looked ok. I suspect the issue was some network / DHCP related issue, my...
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
I was able to boot the pogoplug with my arch pen drive, but not with the debian sdcard. Per the error, I am not able to find /boot/uInitrd in the sdcard. Did I miss anything?. I have extracted the...
View ArticleRe: dpf-ax: unsupported dpf - requests
@superelchi Almost perfect. That behaves as a 132x132 with the (physical) bottom & right sides clipping 2 pixels. I patched dpf_ax_open() to force the size to 130x130, and it behaves correctly in...
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
Great. I think I have extracted arch in sd card by mistake. I have extracted and now it is working. Thanks bodhi.
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
Still I am not able to use my 3TB drives with latest uboot and debian. Quote [ 21.476657] NTFS-fs error (device sdb1): parse_ntfs_boot_sector(): Volume size (2TiB) is too large for this architecture....
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
The new kernel does not recognize my hard drives via HUB at all.
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
Am again at Step 0 :(. Now the drives are not recognized in Debian too.
View ArticleRe: Pogoplug V4 original MTD partitions
Thanks for posting this. Can you clarify if this is for the Pogoplug Series 4 or Mobile or does it even matter? Also, what are the instructions for restoring the various mtd partitions back? Thanks
View ArticleRe: owncloud optimization
You'll probably get better support from the owncloud forum. I tried owncloud on my Pogoplug E02 and it was way too slow for me. Also the iPhone app was crap too. I just ended up using the build in...
View ArticleRe: Pogoplug E02 - Just switched to Debian from Arch Linux ARM. How about...
samba is fairly simple to install apt-get install samba edit the smb.conf in /etc/samba/ or use mine https://dl.dropboxusercontent.com/u/42238/pogoplug/debian/smb.conf (open to all, share root$ and...
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
vaidyasr, > Great. I think I have extracted arch in sd card by > mistake. I have extracted and now it is working. > Thanks bodhi. Now that's great to hear you can boot both USb and SD card!...
View ArticleRe: 2013.10 U-Boot for Pogoplug V3 (OXNAS)
grayman4hire, > I'm a little confused regarding the mtd > partitions. So can we leave the mtd partition as > stock? You could set them back to stock, I don't see any problem with doing that.
View ArticleRe: Linux Kernel 3.15.3 Pogo V3 (Oxnas OX820) package and rootfs (Flattened...
Shv, I dont think my spl image works in SATA mode. But you could try. NAND and SATA versions are built differently. I'd doubt that it would work.
View ArticleRe: Pogoplug V4 original MTD partitions
grayman4hire Wrote: ------------------------------------------------------- > Thanks for posting this. > > Can you clarify if this is for the Pogoplug Series > 4 or Mobile or does it even...
View ArticleRe: dpf-ax: unsupported dpf - requests
Interesting. So let's try a 130x130-pixel-shifted version. ;) superelchi
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
@NSA320 users, U-Boot testers wanted! http://forum.doozan.com/read.php?3,12381,16787#msg-16787
View ArticleRe: Upgrading my Pogoplug
Okay - I did some more tweaking to the HDD in order to try and boot off of it. I repartitioned it, and now the rootfs is /dev/sda1. I copied the existing working partition from my USB stick to the...
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
Hi bodhi, Am configuring the samba, I can't make it as read/write. I read lot of forums and made the changes, still I can't write from windows.
View ArticleRe: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome,...
bodhi; ETA 2 weeks... (TKS!)
View Article