Re: dpf-ax: unsupported dpf - requests
@superelchi How about the original firmware - does power off work here? With original firmware power off works beautiful :) But with cracked never worked....
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Cool! thanks for testing Chris.
View ArticleRe: owncloud optimization
Better don't use Owncloud. It's far too ressource hungry. I tried it on my homeserver and it took too much ressources and was too slow. I finally switched to Seafile, which also works properly on the...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Also I noticed this message.. Using machid 0x691 from environment I wonder why that's different... Bodhi, Do you think this setup could work with grub-uboot or grub-efi-arm Kernel requirements for...
View ArticleRe: NSA 325 V2 Debian Is Possible!
Recreate your USB rootfs as described in this thread: http://forum.doozan.com/read.php?2,12096 Boot with it and post the log if you can't.
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Hey Christ, I believe 0x691 was the original machid for the reference board (1681), not the correct one to use with new kernel (0xab7, i.e. 2743). It would boot OK, but machid should match the kernel...
View ArticleRe: force Debian to Boot first from USB Flash not HDD
msanad, You still have the same boot command: bootcmd=usb start; run usb_bootcmd; usb stop; reset usb_bootcmd=run usb_set_bootargs; run usb_boot usb_set_bootargs=setenv bootargs console=$console...
View ArticleRe: Linux Kernel 3.15.3 Pogo V3 (Oxnas OX820) package and rootfs (Flattened...
新手提问：我想使用声卡，但是看上去不支持，我该怎么做？谢谢！ Newbie question: I want to use a sound card, but does not support, what do I do? Thank you!
View ArticleRe: force Debian to Boot first from USB Flash not HDD
sorry , but i dont undersatand what do you mean by (Arrange them backward in this fashion )
View ArticleRe: Linux Kernel 3.15.3 Kirkwood package and rootfs (Non Flattened Device Tree)
Hello, I have the same problem like absintos but with nsa325. After updating the kernel from 3.14.0 to 3.15.3 following bodhi's guide (from "Updated 03 July 2014"), this is how the boot process looks...
View ArticleRe: GFHome - debootstrap failed.
bodhi, Thanks for your reply. I actually, just got something working. What I did was use the other goflex base (not mod/bricked one) with usb stick and loaded archlinux on the usb drive...I did not go...
View ArticleRe: GFHome - debootstrap failed.
jfharper, > boot with. I tried the rootfs you posted on > another thread, but did not do the kernal > stuff...as I didn't understand it...maybe that is > why the rootfs didn't work. If...
View ArticleRe: 2013.10 U-Boot for Pogoplug V3 (OXNAS)
zzbao, > This is different from the instruction (mtd0 -> > boot, mtd1 -> data). can I proceed? Yes. > Also, I don't have /etc/fw_env.config file. But I > have serial connection. I...
View ArticleRe: Linux Kernel 3.15.3 Pogo V3 (Oxnas OX820) package and rootfs (Flattened...
Thanks for keeping this cheap device alive. Has anyone booted from sata and if so is there a guide for booting from sata? Thanks.
View ArticleRe: Linux Kernel 3.15.3 Pogo V3 (Oxnas OX820) package and rootfs (Flattened...
Yes. It should work. I meant to release u-boot images for this, but have not get around to test it. Booting directly with SATA is really not necessary, since you can put just the rootfs on SATA and...
View ArticleRe: Linux Kernel 3.15.3 Kirkwood package and rootfs (Non Flattened Device Tree)
Peter, > Anyway: I hope to be able to use the RTC again > like in stock image. Do You think the problem with > RTC is fixed in this kernel ? If not, I don't have > o bother with new kernel...
View ArticleRe: Linux Kernel 3.15.3 Pogo V3 (Oxnas OX820) package and rootfs (Flattened...
My drive is both usb/sata and it boots fine from usb but not from sata. When i try to boot from sata i get this error, seems like it's not even detecting the drive: Main Loop Hit any key to stop...
View ArticleRe: 2013.10 U-Boot for Pogoplug V3 (OXNAS)
Thanks! I think I got the uboot flashed: Pogo b01 is under Arch, I SSH from a ubuntu machine to carry out the commands. I followed step 5 to 10. every thing is the same as yours. but after reboot, I...
View ArticleRe: GoFlexNet not getting IP
Finally I have installed the packages I use and everything seems to be running fine. Thanks again for all the help.
View Article