Quantcast
Channel: Linux Device Hacking
Browsing all 46949 articles
Browse latest View live
↧

Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

I noticed that I can't shutdown my NSA320 using power button in combination with input-event-daemon. It seems the event is not generated as polling /dev/input/event0 leads to no results. Could it be...

View Article


Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

Gaogao, Possibly. See this post: http://forum.doozan.com/read.php?2,12096,12987#msg-12987 I will release 3.10.4 with this config option (in a couple days).You can give it a try then!

View Article


Re: Help with bricked GoFlex Home pin numbers

Thanks for the quick reply. I'd seen that post before but was worried it wouldn't work since the pin numbers on my board appear to be arranged differently. I tried using the pins based on location in...

View Article

Re: Help with bricked GoFlex Home pin numbers

Art Freeman Wrote: ------------------------------------------------------- > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 > Storage Device(s)...

View Article

Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

can't wait then :) TIA

View Article


Re: A safer way to hack GoFlex Home

very informative post ,thanks for sharing

View Article

Re: Booting Debian on Pogoplug Pro

OK, so I just deleted the 2.6.32.61 github repo, because this seemed to be a dead end. BUT, I have this kernel here for a Pogoplug V3 Classic:...

View Article

Re: Help with bricked GoFlex Home pin numbers

For future reference (or googlers) the pin assignments for UART using the silkscreen reference on a GoFlex Home: 1: +3.3V (use if you need to power a TTL-RS232 level converter - do not try to apply...

View Article


Re: Booting Debian on Pogoplug Pro

Can you please provide the patch files for your changes to the Medion/Zyxel sources?

View Article


Re: Booting Debian on Pogoplug Pro

The complete sources, including patches, are available here, now: https://github.com/ingmar-k/2.6.31.14_OXNAS_kernel

View Article

Re: Help with bricked GoFlex Home pin numbers

majic79 - thanks for confirmation on the pin numbers. This should help future users with the same issue. bodhi - Yes, I originally followed the Arch ARM directions to a successful install. Tried...

View Article

Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

Kernel 3.10.4 Kirkwood package was uploaded. Please see 1st post for download link.

View Article

Re: Help with bricked GoFlex Home pin numbers

Hit a key to prevent auto-boot and do a "printenv" and post the contents here - looks like either a hosed UBI File System (UBIFS) or incorrect parameters for UBI boot (don't know the ArchArm...

View Article


Re: Help with bricked GoFlex Home pin numbers

Art Freeman Wrote: ------------------------------------------------------- > majic79 - thanks for confirmation on the pin > numbers. This should help future users with the > same issue. >...

View Article

Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

bodhi Wrote: > I will release 3.10.4 with this config option (in > a couple days).You can give it a try then! unfortunately it did not help, still no events from the power button. TKS for the...

View Article


Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

Gaogao, "Still no events from the power button". I don't have the NSA320 so not sure about this. It might not be related to the Config_Marvell_Phy option. As I recalled, iConnect has similar button,...

View Article

Re: Linux Kernel 3.9.11 Kirkwood package and rootfs (Non Flattened Device Tree)

Debian Kirkwood rootfs 3.10.4 was uploaded. Please see 1st post for download link.

View Article


Re: Rescue System

hao write hooks to automate recovery?

View Article

Re: PogoPlug Mobile SD Boot Troubles

These parameters: mmc_bootcmd 'mmc init; run mmc_set_bootargs; run mmc_boot' mmc_boot 'mw 0x800000 0 1; ext2load mmc 0:1 0x00800000 /boot/uImage; if ext2load mmc 0:1 0x01100000 /boot/uInitrd; then...

View Article

Re: Suggestion for a new forum name

I honestly don't know why raniadoll answered here, but I have to say that gnexus's suggestions does indeed make sense to me. Allwinner A10 for a long time wasn't the best choice anymore. So, something...

View Article
Browsing all 46949 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>