Re: Can boot, but cannot reboot
Bodhi thanks for the quick repsonse! I had a few troubles getting into the uboot console first.. Under Ubuntu I had to use this command nc -up 6666 192.168.178.20 6666 and instead of using any key, I...
View ArticleRe: Yet Another cannot boot thread
dinjo Wrote: ------------------------------------------------------- > Hmm,.. not sure why its a delay but I'll just let > it go but i could not figure out why its not > allowing me to go to...
View ArticleRe: [GoFlex Net] SATA
Thx, Bodhi. Ok, the 3.12.0 I must see to integrate it into my installation. I've tried the 3.3.2 Kernel, but one of my main problems is the power supply for my 3,5" HDD on the sata port(s). I have...
View ArticleRe: ZyXel NSA325 to run Debian?
I got the Arch pach which includes NSA325 from their GITHub.
View ArticleRe: ZyXel NSA325 to run Debian?
Thanks. I was just looking for that. Just got checked into my hotel and was gonna pull it up for you. Thanks for any and all help with this topic. ;)
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi Mark, I forgot :) I've already uploaded kernel 3.2.28 back in March. Try this and see if it has what you need. http://forum.doozan.com/read.php?2,11601,11601#msg-11601
View ArticleRe: [GoFlex Net] SATA
Tommes, Indeed, you are running the GoFlex Net as the Referrence Board. Meaning it runs as a Sheeva Plug. This is needed because you're running Kirkwood kernel from mainline. So after you've installed...
View ArticleRe: ZyXel NSA325 to run Debian?
SOL, I'll extract the patch and build it in the new kernel release and you can test it!
View ArticleRe: ZyXel NSA325 to run Debian?
Thanks so much. I won't be back in town until after December 2nd. But I will definitely test and report. Thanks again for your efforts. Regards, ~SOL
View ArticleRe: Can't boot Debian, Arch boots fine (SATA)
Hello again, I tried compiling the kernel yesterday but was overwhelmed by the number of menus when I run "make menuconfig". I have no idea what I need to check in the menus theres a lot of stuff I...
View ArticleRe: Yet Another cannot boot thread
I'm currently mounting HDD from rc.local but i want it to automount since i wanted all process to have clean startup and clean shutdown(update-rc,d) which at the moment may not be happening , ex- The...
View ArticleRe: Can't boot Debian, Arch boots fine (SATA)
Yesterday evening I did compile a test kernel (v3.12) for the Pogoplug V3 Classic and Pro. I will test the kernels today and upload them, if they work. Did want to try the new version anyway.
View ArticleRe: Can't boot Debian, Arch boots fine (SATA)
That sounds really nice! I guess this is the better way as you seem to know what you're doing :) Waiting for your report and maybe even the kernel... Thanks again crckmc
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi bodhi, Your Kernel 3.2.28 works, I set machid to dd6 then I have the LED in Green, and the pan/tilt work,too. Thank you very much. Mark
View ArticleRe: Shv rootfs for openvpn server
think not possible for arm only x86 and x64, see: http://www.unixmen.com/install-openvpn-asaccess-server-on-ubuntu-debian/ so going to go for the manual approach.
View ArticleRe: Shv rootfs for openvpn server
You should check your facts, my friend. ;-) The package is readily available for all current debian versions on ARM (armel in this case). Check here: http://packages.debian.org
View ArticleRe: Can't boot Debian, Arch boots fine (SATA)
ingmar_k, This is a very exciting development :) it is Debian right? did you cross compile or native? so we will just flash it in the same NAND partition and use Arch or stock uBoot?
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Hello All - I bricked my Pogoplug Mobile V4 A1-04 I currently have a UART hooked up and was successful at loading the latest U-Boot in nand that can boot through SD. I have tried loading the latest...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
GeorgeRosar, Your uBoot envs for bootargs were not setup correctly. alarm_args=setenv $boot_args_console root /dev/mmcblk0p1 rootwait rootfstype ext3 alarm_boot=ide reset alarm_mmc=mmc init; mmc init;...
View Article