Re: Change device ordering when booting from usb
SOL, There is no sure way to control the device ordering. It is purely depending on which USB/SATA device "spins" up first. Usually SATA always come up first. But if you have more than one USB ports,...
View ArticleRe: Automount USB drives
Almaz, The behavior you decribed in this post above: http://forum.doozan.com/read.php?2,14617,14634#msg-14634. But since you are using dinjo's version without problem, then I guess you can ignore it.
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
QuoteGeert I am still curious to learn if anybody ever got booting into the original Pogoplug OS going from Davy's U-boot on the Mobile A1 Not too many people are interested in doing this, I think....
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo E02
StephenR0, I looked at this IDE identification code (to identify the hard disk) a week ago. Very ugly to read (the authors said so :) I put a debug statement in to print out all relevant values and...
View ArticleRe: NSA 325 V2 Debian Is Possible!
Buttzy10169 Wrote: ------------------------------------------------------- > I think I seen someone before who had some kind of > if statement in uboot but you would have to check > on that I...
View ArticleRe: NSA 325 V2 Debian Is Possible!
No no soldering on mine anyway it already had pins. And for uboot its risky compileing and flashing a new one unless you can get uart booting to work or have a jtag. I think its possible with the...
View ArticleRe: NSA 325 V2 Debian Is Possible!
The stock uBoot does not have advance scripting capability, so I don't think "if" statement would work, IIRC what WarheadsSE said. However, a limited uBoot envs scripting capability would be able to...
View ArticleRe: NSA 325 V2 Debian Is Possible!
@Buttzy: is the serial a TTL 3.3V one? @Bodhi, that's clear, and I admit I kinda already knew this, but ignorantly thought it was available only in custom compiled u-boot - thank you for reminding me...
View ArticleRe: NSA 325 V2 Debian Is Possible!
davidedg, Yes. The 2013.10 uBoot builds for GoFlex Home, GoFlex Net and Pogo E02, that I've uploaded, support GPT booting and other latest features (the official uBoot does provide GPT, I only needed...
View ArticleRe: UART Booting HowTo for Selected Kirkwood Devices
A happy new year to you guys. Unfortunately my problem with kwboot is still pending. I wasn't aware that my AMD C-50 netbook is capable of running 64bit-Linux (sorry, I didn't deal with Linux for a...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo E02
Not a problem. I'll boot from usb until a solution presents itself.
View ArticleRe: NSA 325 V2 Debian Is Possible!
Buttzy10169 Wrote: ------------------------------------------------------- > No no soldering on mine anyway it already had > pins. > > And for uboot its risky compileing and flashing a...
View ArticleRe: NSA 325 V2 Debian Is Possible!
I actualy did not think to check for a jtag connection on mine. best to see if you can get uart booting to work first there is a thread on this forum about uart booting and how far I got is above in...
View ArticleRe: Booting Debian on Pogoplug Pro
ingmar_k Wrote: ------------------------------------------------------- > Edit 4: > Some testers would be great. > Kernel for Pogoplug V3 Classic: >...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi, I tried 3.12.0 tld1,3 & 5 : same result. For that particular test, I installed them progressively. But during my first update, I went straight from 3.3.2 to 3.12.0 tld5 and had the same...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Thanks MG :) very interesting results! I will take a closer look at this. Especially it's a little puzzling why the basic 3.12.0-tld-1 rootfs test shows normal write speed? but kernel 3.12.0-tld-1...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Hi Bodhi, I could successfully update my GoFlex Net & my Pogo E02 with your uBoot and update to Debian Jessie and your latest 3.12.0 kernel. Thanks for your solutions! Everything works great...
View Article