oakle470,
You don't need to reflash uBoot again! it should be fine as it is.
1. The first thing to do is to get uBoot envs printed out: interrupt uBoot and post the output of printenv here:
> printenv
2. Make sure the USB drive format matches usb_rootfstype, and it's labeled rootfs.
3. To ensure uBoot will find this rootfs, some uBoot envs need to be changed.
But let's verify 1 and 2 first.
You don't need to reflash uBoot again! it should be fine as it is.
1. The first thing to do is to get uBoot envs printed out: interrupt uBoot and post the output of printenv here:
> printenv
2. Make sure the USB drive format matches usb_rootfstype, and it's labeled rootfs.
3. To ensure uBoot will find this rootfs, some uBoot envs need to be changed.
But let's verify 1 and 2 first.