Re: MacPlug & SMBPLug : Mac/AFPD or Windows/SMB + Print services in a...
If this is helpful, here's what it looks like when it is trying to boot from the internal flash now: http://pastebin.com/jc8q6rEQ
View ArticleRe: Attempt to restore Pink Pogoplug e02 to factory corrupt uboot. Where to...
oakley470 Wrote: ------------------------------------------------------- > I guess it'd help if i could spell. :)) Thank you i am > booted back into debian now. So i think i have > given up...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
mindm49907, You can use UART booting to boot and then flash a known good uBoot for the NSA320: http://forum.doozan.com/read.php?3,7852,7852
View ArticleAfter installing readonly emdebian on NAND, no longer able to boot from usb
I installed emdebian following this thread http://forum.doozan.com/read.php?2,72. After reboot, I no longer able to boot from usb. I tried to set fw_setenv bootcmd 'run bootcmd_usb; run bootcmd_ubi;...
View ArticleRe: After installing readonly emdebian on NAND, no longer able to boot from usb
toomyzoom, try: fw_setenv bootcmd 'run usb_bootcmd; run bootcmd_ubi; run bootcmd_pogo; reset'
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hello again guys, sorry for my apparently late reply, but my Saturday's post went missing somehow. Anyway, I tried the saveenv-command after erase, after write.e, and after both commands, but...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hi, I know for a fact (learned the hard way) that if the server is not reachable (in your case 192.168.11.149), it will seem as if the thing does not boot. After over an hour, it might actually relent...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
chessplayer Wrote: ------------------------------------------------------- > Hi, > > I know for a fact (learned the hard way) that if > the server is not reachable (in your case >...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hi Bodhi, this is what uBoot is saying: U-Boot 2011.12 (May 03 2012 - 17:04:23) ZyXEL NSA320 2-Bay Power Media Server arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery...
View ArticleRe: Chromecast
Indeed. Just curious how does the Marvell Armada 1500-Mini 88DE3005 used by this device compare to a quad-core Cortex A9 ARM Rockchip RK3188?
View ArticleRe: Booting Debian on Pogoplug Pro
Looking forward to that! By the way, the 2.6.32 kernel is announced to be supported until mid of 2014: https://www.kernel.org/releases.html As you can see from this table, a target for the next...
View ArticleRe: Attempt to restore Pink Pogoplug e02 to factory corrupt uboot. Where to...
Guess i spoke too soon. So things went fine installing arch to a second flash drive, then during the update process of arch it stopped being able to boot. So reflashing a flash drive to your rootfs, i...
View ArticleRe: Booting Debian on Pogoplug Pro
Well, well. First try and the compiled 2.6.32.61 kernel didn't even boot. :( Would've been too easy, though. Will have to investigate the next few days, if I find the time.
View ArticleRe: Booting Debian on Pogoplug Pro
That's bad luck. I've seen your repo on github, but where are the (altered) patches? Did you push them?
View ArticleRe: Attempt to restore Pink Pogoplug e02 to factory corrupt uboot. Where to...
It appears there is a solution to this problem here http://forum.doozan.com/read.php?2,8153 however i do not know how to go about fixing this. I am using your most recently update rootfs by the way
View ArticleRe: Attempt to restore Pink Pogoplug e02 to factory corrupt uboot. Where to...
oakle470, You don't need to reflash uBoot again! it should be fine as it is. 1. The first thing to do is to get uBoot envs printed out: interrupt uBoot and post the output of printenv here: >...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hi Chessplayer, Probably because you need to set /sys/class/leds/xxx/trigger to the correct value at the end of /etc/rc.local to turn it green. It's in /etc/rc.local in my rootfs. AFAIK, the NSA320...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hello again, I set up the serverip to my router's IP as chessplayer suggested (i also adjusted the ipaddr, accordingly) using UART-Booting, Then I booted via UART-Booting again, and got the message...
View ArticleRe: Booting Debian on Pogoplug Pro
Not yet. At the moment it's just the vanilla kernel, without any patches. The plan was to only push the patched version, if it was at least booting. Edit: I will start over in a few days, applying...
View Article