Re: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)

bodhi Wrote:
-------------------------------------------------------
> Mark,
>
> Here it is:
>
> kwboot
> md5:
> 0efd011bdb244436e432a8de33e639a1


bodhi,
Thank you very much for your help.
I run kwboot on E02 then test on NSA320, when I turn on the NSA320, it just pick up the uboot right the way

root@debian:/test# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.NAND-NSA320-IDEfixedv4-scripted.kwb -p
Sending boot message. Please reboot the target.../
Sending boot image...
  0 % [......................................................................]
  1 % [......................................................................]
  3 % [......................................................................]
  5 % [......................................................................]
  6 % [......................................................................]
  .
  .
 99 % [....................................]
[Type Ctrl-\ + c to quit]


U-Boot 2011.12 (May 03 2012 - 17:04:23)
ZyXEL NSA320 2-Bay Power Media Server

SoC:   Kirkwood 88F6281_A1
DRAM:  512 MiB
WARNING: Caches not enabled
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
MV88E1318 PHY initialized on egiga0
No link on egiga0
ping failed; host 192.168.11.149 is not alive
Hit any key to stop autoboot:  0

But when I test on pogoV4 , it just go no where.

kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.nandpogoV4-MMC-mtdparts-noSATA.kwb -p
Sending boot message. Please reboot the target.../