Re: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Tom62 Wrote: ------------------------------------------------------- > I can boot this kernel on NSA310, but network is > not working. Can you please add R8169 module > (CONFIG_R8169=y)? It...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Does 8169 not require firmware to funcfion properly? i know iv seen deaktops complain about missing firmware for 8169 devices???
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi bodhi, Do you have kwboot can work under Linux Kernel 3.12.0 Kirkwood ? I do like to try UART Booting but I only have one PC with WIN7. If you do can you send me a copy Thanks Mark
View ArticleJeff's uBoot, installed, can't mount /dev/mtdblock3?
I just need a little help or clarification. I've got a Pogo-E02 that I've installed Jeff's uBoot successfully. Although I'm currently not boot and running an OS off a USB drive, I'd like to play with...
View ArticleRe: Dockstar: Should I update uBoot?
Yes, that's what I used. I ran it back in March, and I don't believe it has been updated since then. The script is very nicely and conservatively written: It will pull the existing uBoot off the NAND...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi Mark, > I do like to try UART Booting but I only have one > PC with WIN7. I have kwboot binary only for ARM. I'm not sure if there is such a version for x86. Do you have another Kirwood plug...
View ArticleRe: NSA 325 V2 Debian Is Possible!
Buttzy, I think the 2nd dump command is the right one (one that produces exact 512 KB) nanddump -nf uboot.mtd0.bak -l 0x80000 /dev/mtd0 The correct sequence is - execute kwboot command on the host...
View ArticleRootfs on f2fs or btrfs, is possible?
Hello, I would like to try using f2fs or btrfs as root filesystem of my usb key for my goflex. Is it possible? What do I need to put on uboot? Thanks, Mario
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > It does not work in what way? Can you describe it? > No IP, or NIC not coming up?.... Does it have > anything to do with...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > Hi Mark, > > > I do like to try UART Booting but I only have > one > > PC with WIN7. > > I have kwboot...
View ArticleRe: NSA 325 V2 Debian Is Possible!
I gave it a try like you sujested. But at the most it gets to is about 23%. Then any try after that barely gets started and then a few tries later the device just boots normaly.
View ArticleRe: no ssh sccess to pogoplug (E02)
I had similar troubles but for what it's worth when I installed the pogoplug backup software. Only to launch it and click web access taking me to the exact same webpage. Then I could actually set and...
View ArticleRe: Rootfs on f2fs or btrfs, is possible?
You can use f2fs as rootfs, but the /boot needs to be in ext2 or ext3 partition. So - create 2 partitions on your USB thumb using fdisk. 1st partition is bootable Linux, second is normal Linux. -...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Mark, Here it is: kwboot md5: 0efd011bdb244436e432a8de33e639a1
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > Mark, > > Here it is: > > kwboot > md5: > 0efd011bdb244436e432a8de33e639a1 bodhi, Thank you very much for...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
The correct sequence to boot UART on a target that is quirky, for example Pogo V4 or Mobile: - connect to the host using SSH. - execute kwboot command on the host. It will start spining the /...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Tom62 Wrote: ------------------------------------------------------- > bodhi Wrote: > -------------------------------------------------- > ----- > > It does not work in what way? Can...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Many thx for your work bodhi. I'm trying to install the actual image on a Dockstar with a modified flash layout: 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000010000000 : "data" But the...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
bertc3p0, If you want to boot from USB , then your bootcmd definitely has problem. If you want to boot from NAND then the rootfs must be in NAND, which is not there right now (your mtd1 name is data)....
View Article