Re: U-Boot loading compressed uImage
@ingmar_k : Yes, there is. That information should be searchable on the net. google "linux kernel arm compression" although I need to check the compression algorithm again. I think we changed it a bit...
View ArticleRe: NSA325 Power off before Powing on?
Mine it happens everytime i turn it on. Only time it doesnt is if i reboot from within debian. (must check again to be sure)
View ArticleRe: Boot from usb partition with name rootfs
The problem is not the label, but that HDD causing the EHCI timeout.
View ArticleRe: NSA325 Power off before Powing on?
Yeah, how long was it off? If I power off, then turn it back on within a minute or two, its not a problem. 5+ minutes and it is "cold"
View ArticleRe: NSA325 Power off before Powing on?
It happens whetever its been off for a few seconds (less that 10) andwhen its been off for minutes.
View ArticleDockstar: Should I update uBoot?
I have a 2.6 kernel and Debian Squeeze running fine on a USB 2GB stick. I want to install a fresh Wheezy on a different USB stick and switch back and forth while I get the new stick configured....
View ArticleRe: Dockstar: Should I update uBoot?
Freakeao Wrote: ------------------------------------------------------- > Do I need to upgrade my uBoot to install Wheezy? Probably. You should be at least on uBoot 2011.12, produced around Feb...
View ArticleRe: Boot from usb partition with name rootfs
Yes. However, using rootfs label will get around this timed out problem , sometime but not in all cases. See here for how to set it: http://forum.doozan.com/read.php?3,8044,8152#msg-8152
View Articlepass stxadmin refused
I've had a Dockstar for years and I put Debian Squeeze on it at the time and was fancying installing Wheezy, so.. I do a graceful shutdown, remove USB stick and power on the Dockstar, ssh root@IP of...
View ArticleRe: Dockstar: Should I update uBoot?
Another option is using this rootfs: http://forum.doozan.com/read.php?2,12096 I compiled with L2 disabled during boot in this kernel so that it can be used with old uBoot!
View ArticleRe: pass stxadmin refused
This is applicable to your situation, too: http://forum.doozan.com/read.php?3,14512,14516#msg-14516
View ArticleRe: NSA 325 V2 Debian Possible?
Thanks Buttzy, I'm looking at it. I have to look for my old notes to find the format!
View ArticleRe: NSA 325 V2 Debian Possible?
Buttzy, The numbers in the header don't make sense to me! So let's just trial and error. Dump only 4 blocks (512K). nanddump -nof uboot.mtd0.bak -l 0x80000 /dev/mtd0 and (I doubt that the below will...
View ArticleRe: NSA 325 V2 Debian Is Possible!
with the second command the dumped uboot got this far: sudo ./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.mtd0.bak -p Sending boot message. Please reboot the target...- Sending boot image... 0 %...
View ArticleRe: Boot from usb partition with name rootfs
Thant makes sense. I have set the disk label, but not yet set fw_setenv usb_init "usb start; setenv usb_root LABEL=rootfs" But one question before: can I then still boot from the internal insallation,...
View ArticleRe: Install testing from the very beginning?
I'd like to report that the Sandisk Extreme USB flash drives work amazingly well as disks for Pogoplugs. Small random I/O is indeed very fast--much, much faster than other USB drives. Installing...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
I can boot this kernel on NSA310, but network is not working. Can you please add R8169 module (CONFIG_R8169=y)?
View ArticleRe: debootstrap deleted :-( help
how have you solved the problem a link error line 22. Which is caused by the file usr / share / debootstrap / function is missing? With my version of debootstrap related Synology DS110 + ave my...
View ArticleRe: Dockstar: Should I update uBoot?
Yes I meant booting into my old Squeeze install with a new uBoot. I assume you mean this http://projects.doozan.com/uboot/ when you mention the shell installer script that will check and possibly...
View ArticleSuggestions for mounting USB serial port in Pogo case
Hello, Taking a tip from Qui's instructions on making a USB console port: http://blog.qnology.com/2013/10/pogoplug-e02-v2-serial-connection.html I did some research and found this device, which I now...
View Article