Re: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)

Bodhi,

I have tried your uBoot image. I can not get NSA320 network initialized with this uBoot. Here is the output:

(%5)(07:42)(pis)/mnt/tftp> ./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2013.07.goflexnet.mtd0.kwb -p                                                                    
Sending boot message. Please reboot the target...\
Sending boot image...
  0 % [......................................................................]
  1 % [......................................................................]
  3 % [......................................................................]
...
 97 % [......................................................................]
 99 % [....................................]
[Type Ctrl-\ + c to quit]


U-Boot 2013.07-rc1 (Jun 29 2013 - 02:09:32)
Seagate GoFlex Net

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Using egiga0 device
ping failed; host 192.168.0.56 is not alive
Hit any key to stop autoboot:  0 
u-boot>> 
u-boot>> run preboot
Using egiga0 device
ping failed; host 192.168.0.56 is not alive
u-boot>>

So the uBoot for GoFlex can not initialize the egiga0 device on NSA320. uBoot for E02 could not initialize the NSA320 network either.

I also tried uBoot for NSA320 from Davy and netconsole worked.