Re: Please somebody soon give us a decent *board.org
@ Lucas You seem to have misinterpreted my comments: I said: QuoteThe imx6q SoC in the Wandboard quad has a good established community of users and developers. That comment refers to the imx6q SoC...
View ArticleRe: howto write uboot to nand
You can do this. But first you will need to verify if the Guruplug mtd0 has stock uBoot in the similar way the other plugs have. And flash it in a similar fashion as described in this thread:...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
@syong & chessplayer, For your NSA320, do you use Davy's uBoot: https://www.dropbox.com/sh/nwt2kbvetvgvroo/e-pNtdMhCC/Kirkwood/rootfs_images/NSA320quickstart or do you use the stock uBoot? if you...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi, I use Davy's uBoot. Here is the output of the netconsole: U-Boot 2011.12 (May 03 2012 - 17:04:23) ZyXEL NSA320 2-Bay Power Media Server arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67)...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Thanks Syong, Have you tried UART booting? Perhaps you could try my Goflex Net uBoot build to see if you see the same Netconsole problem?
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi, Never tried. How to do that?
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
See Davy's post: http://forum.doozan.com/read.php?3,7852,7852 The NSA320 has the boot ROM version that supports UART booting. So if you have serial console, you can boot in UART mode, it will not...
View ArticleDockstar U-boot problem
I have a dockstar with debian which have been working for 3 years without problem. But now, every time I tried to reboot it, it just hangs there, it can not fall-back to original system either. I...
View ArticleRe: Dockstar U-boot problem
davidnewton Wrote: ------------------------------------------------------- > I have a dockstar with debian which have been > working for 3 years without problem. But now, > every time I tried...
View ArticleRe: Dockstar U-boot problem
bodhi Wrote: > > You're lost your /boot/uInitrd. Check the drive if > it's not there, copy it (as root user) from the > other dockstar. Thanks a lot for your reply. I don't know if this...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi, Thanks for the link. Will try. So the motivation for UART booting is to test uBoot before committing to NAND?
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi, Seems UART booting working right here now. Where is your Goflex Net uBoot build and what is the Netconsole problem?
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Syong, I've attached the uBoot image in this post. Basically, netconsole is broken for me in that whenever I try to run a command, the 2nd character is lost. For example, printenv becomes pintenv. If...
View ArticleInstall script won't work
Hi, Sorry for cross-posting, but maybe this forum is more adequate for my problem. I had a usb-stick going bad and now have to reinstall debian on my pogoplug v2. I have the rescue system v2...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi, I have tried your uBoot image. I can not get NSA320 network initialized with this uBoot. Here is the output: (%5)(07:42)(pis)/mnt/tftp> ./kwboot -t -B 115200 /dev/ttyUSB0 -b...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Syong, Thanks for trying, too bad I was hoping it would work pass that point! But thanks to your test I know my setup is not a problem.
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Header package linux-headers-3.8.11-kirkwood-tld-3 was uploaded. Please see 1st post for Dropbox link.
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
I'm a bit of noob, but...I gave this a go on my TonidoPlug2. I have yet to be successful. Here is what I did: 1) made a fresh stock tondo install on a usb stick (that's squeeze), 2) added the wheezy...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
@postman, Before installing kernel, what do you have? can you ssh in? What's your output when you run dpkg -i to install? if you got error and didn't not generate initrd.img, then you can't boot...
View ArticleDockstar can not boot into debian
I have a dockstar worked with debian for a long time. This weekend, I updated the uBoot on it and now, it can not boot into debian anymore. I have tried several flash drives which all work fine on...
View Article