Re: Booting Debian on Pogoplug Pro
I would love to support these devices, I own them, and I think they are good systems, but I have no idea how to cross compile or code a kernel. Any idea who is working on coding the kernels? But I...
View ArticleRe: Change device ordering when booting from usb
SOL, If you run Debian then using label for each disk would be the best approach, IMO. If you run Arch without initrd, UUID/PARTUUID is the only way to ensure the recognition, AFAIK. But you can also...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hallo, thanks in advance for this service ;-) I have an unsupported device usb view info identify screenshot firmware I hope, you can help me. Andreas
View ArticleRe: dpf-ax: unsupported dpf - requests
@wea_gruena identify.py says: ./identify.py fulldump_win_20140108-103730.bin Looking for firmware.............: Not found. This in no known firmware! Sorry, no matching dpf found. So: no Buildwin...
View ArticleRe: dpf-ax: unsupported dpf - requests
@BmD_Online Please try attached fw. Do you have a name or a link to seller / manufacturer? Else it will stay acme_8... If there is no reset switch - do you have an on/off switch? Works also. As an...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Bodhi, The previous output I listed was exactly the same whether I was in netconsole or UART. At this point I'm starting to convince myself it is a USB/SD/Flash compatibility related issue. I have...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Geo, You'd need to stop netconsole to see full UART booting process. When both are activated at the same time, you stopped UART output at that point. I believe that it should show more output in UART...
View ArticleRe: Booting Debian on Pogoplug Pro
gr0ck Wrote: ------------------------------------------------------- > > Any idea who is working on coding the kernels? > There are people working on compiling new kernel. See first post....
View ArticleRe: dpf-ax: unsupported dpf - requests
Great, it works. I have to remove my AA batteries, plug USB cable keeping power button pressed. My DPF is named "DPF1026", by "KEENOX". It looks like this. BTW, do you have your splash image in other...
View ArticleRe: Change device ordering when booting from usb
You can indeed run ALARM with initrd, we just don't provide it for you and you will need to follow the wiki in configuring the necessary hooks.
View Articlereverse brick?
Hi, I have a pogo E02 that I can only boot with a USB stick. If I remove the usb stick and wifi dongle and plug in the ethernet cable the LED never lights up. I cannot boot into the rescue system. I...
View ArticleRe: reverse brick?
Setup either serial console, or netconsole. And while in console try arcNumber 2097 setenv 2097 If it does not boot, pls post the console log here.
View ArticleRe: reverse brick?
bodhi thanks for responding. Here is the output of netconsole: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++...
View ArticleRe: [GoFlex Net] SATA
Hi, I'm new to GoFlex Net. less than a day, but seems very good device. (earlier nas was much much weaker) I maneged USB boot fine. SATA recognised by kernel. Root fs copied to HDD. But not boot from...
View ArticleRe: [GoFlex Net] SATA
Format the HDD as Ext3. Use this latest rootfs (extract to the HDD per instruction): http://forum.doozan.com/read.php?2,12096
View ArticleRe: Booting Debian on Pogoplug Pro
bodhi Wrote: ------------------------------------------------------- > If you follow instruction in the first post. Your > kernel is Arch Linux smp for OXNAS. Your rootfs is > Kirkwood...
View ArticleRe: reverse brick?
Your machid is 0xdd6 (3542). I suspect that in order to boot the rescue kernel, it must be set to the same as arcNumber. You could try this in netconsole prompt (machid is in hex) setenv arcNumber...
View ArticleRe: Booting Debian on Pogoplug Pro
No you did not mess up! that's how you run Debian rootfs (current method is hybrid, Arch kernel Debian rootfs). If you run Arch then instruction at Arch site is all you'd need. There are users working...
View ArticleRe: Booting Debian on Pogoplug Pro
bodhi Wrote: ------------------------------------------------------- > No you did not mess up! that's how you run Debian > rootfs (current method is hybrid, Arch kernel > Debian rootfs). Glad...
View Article