Re: Booting Debian on Pogoplug Pro
To know which kernel you are running at the moment, please run the command "uname -a". ;-) Just because there is a certain kernel image in the "right" directory, it doesn't necessarily mean that it is...
View ArticleRe: [GoFlex Net] SATA
Hi Bodhi, Thank you very much. I didnt know that you made a fresh RootFS. I will try your description, and probably will work. Thanks for your continuous efforts in kernel and rootfs. Regards,Robert
View ArticleRe: Booting Debian on Pogoplug Pro
gr0ck, I think that you are trying to upgrade from Squeeze to Wheezy. This is very difficult! If you have the 2.6.31.6 kernel from WarheadsSE in your NAND flash you could try my Wheezy rootfs (see...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Bodhi, I have used just the UART and got the same response. My UART is just barely hanging in place - I'll re-solder the connector today and go back to UART console. Geo -
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
@MG, Tested my Ext3 USB thumb, mounted on the Dockstar running 3.12.0-kirkwood-tld-5: root@dockstar:/# dd if=/dev/zero of=/media/HOME/test count=50000 50000+0 records in 50000+0 records out 25600000...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Geo, Please post the entire UART output, from the uBoot version banner to where it got stuck booting kernel.
View ArticleGoFlex Net SATA boot
Hi Bodhi, I made USB ext2 and corrected fstab. it boots. Thank you. But SATA does not boot. 1Hdd partition 1 is ext3 as you suggested 2named to "rootfshd" Is this ok? 3extracted bz2 and tried to boot...
View ArticleRe: [GoFlex Net] SATA
Hi, I inspect USB boot with the new kernel and rootfs. and found goflex boots it two times! it seems rebooted or something. After the second boot seems stable. See nc log. U-Boot 2011.12 (Apr 18 2012...
View ArticleRe: GoFlex Net SATA boot
Robert, Boot with USB and in Debian get the output of fw_printenv and post here. Netconsole does not show activities after the booting message Starting kernel ... unless you do some extra setup in...
View ArticleRe: GoFlex Net SATA boot
Hi Bodhi, I would like thanks your quick responses! My environment not changed since I posted in my first forum mail. Anyway i did it again now: Thanks for your help. :) Robert root@pogo:~#...
View ArticleRe: reverse brick?
That fixed the problem. I can now ssh into the rescue system and get the rescue prompt. I could not interact with the pogo using the dual nc commands. I used this command nc -klu 6666 and was able to...
View ArticleRe: [GoFlex Net] SATA
Hi Bodhi, I changed uboot just to try solve problem. I tried SATA boot but - not booted. New your latest Uboot is the Nov 02 2013 based on this thread:http://forum.doozan.com/read.php?3,12381 Sorry to...
View ArticleSATA boot - Solved
Hi Bodhi. SATA HDD boot solved :) Solution: rename hdd disklabel to rootfs. e2label /dev/sdb1 rootfs Regards, Robert
View ArticleRe: Booting Debian on Pogoplug Pro
ingmar_k Wrote: ------------------------------------------------------- > To know which kernel you are running at the > moment, please run the command "uname -a". ;-) Linux (none)...
View ArticleRe: Booting Debian on Pogoplug Pro
shv Wrote: ------------------------------------------------------- > gr0ck, > I think that you are trying to upgrade from > Squeeze to Wheezy. True I am trying to get to wheezy. Update my...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
@MG, Running kernel 3.12.0-kirkwood-tld-5, if the HDD is mounted at sda1, what's your output of hdparm -C /dev/sda udevadm info --query=all --name=/dev/sda1 mount
View ArticleRe: Minimum implementation of Asterisk for Google Voice?
Yes. Actually, I already experimented somewhat. It works in the local net although the selection if DID is very important. If I call from my mobile over 3G, it seems hardware (!) dependent. Not sure...
View ArticleRe: openVPN setup script
PG: Thanks. It works to ping both ways now using the method you pointed me to. Thank you very much. However, I can only ping the VPN subnet (170.17.0.x or 10.8.0.x). I cannot ping other ip numbers on...
View ArticleHow does Transmission work with non-uPnP router?
Hey guys, I'm on the road, and carrying the Dockstar with me. I'm at a hotel where the router has uPnP disable (I believe so last time I checked). I also have a travel wifi router with me and plug it...
View Article