[libst2205] HighBox Apache 2.4" hack problems
Hi, I'm trying to hack a new DPF. It's a HighBox Apache 2.4". It looks like Perl one, but is was a different different. Hardware detection user@ubuntu:~/st2205u/libst2205$ dmesg (...) [3261252.416745]...
View ArticleRe: Booting Debian on Pogoplug Pro
For my Wheezy image you need the following kernel: Linux debian 2.6.31.6_SMP_820 #7 SMP Thu Jun 14 20:31:06 CDT 2012 armv6l GNU/Linux
View ArticleDebian Transmission with non-uPnP router
I'm looking for information about Bittorrent Transmission in this thread: http://forum.doozan.com/read.php?8,14756 TIA
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Done. /dev/sda is USB /dev/sdb is SATA I did the whole thing in 3.12 & 3.11. Logs are in the zip ...
View ArticleRe: [libst2205] HighBox Apache 2.4" hack problems
QuoteBMD_Online But, searching "H4CK" sequence in memimage_new.bin give me 2 locations. Searching "H4CK" in memimage_new.bin gives me these two positions : 0x23001 0x123001 I have tried to split my...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hello, I have a NSA325 and I can't seam to find a set of comprehensive installation instructions. To date I have chrooted my original zyxel with debian 6. I would ideally like to move this into a full...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
mgazza try following my instructions here: http://forum.doozan.com/read.php?2,14351
View ArticleRe: How does Transmission work with non-uPnP router?
My guess would be it does not have a uPNP port open but torrent still works as long as the other end has an open port. Uploading would probably work fairly poorly, as would trying to connect to anyone...
View ArticleCan't boot from SATA after power fail goes into Rescue
I have a system that typically boots into an ext3 Hard Drive (should allow it to survive power failures), but now will only boot into the rescue system. When I try to do anything on /dev/sda it says...
View Articleupgrading libapt-4.12 breaks everything
I have installed Debian squeeze on my Seagate dockstar,a while ago then successfully upgraded with apt-get to wheezy (7.1) last July. Now I'm trying to upgrade to 7.3. There about 40 packages that...
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
Did uBoot detect it at all? ie. stop netconsole/serial console and check for SATA (I assume you are using a drive that is plugged into SATA port). ide reset Whether it did recognize the HDD or not....
View ArticleRe: How does Transmission work with non-uPnP router?
Thanks for that observation. I'll look for whether any uploading is working at all to confirm.
View ArticleRe: Booting Debian on Pogoplug Pro
shv Wrote: ------------------------------------------------------- > For my Wheezy image you need the following > kernel: > > Linux debian 2.6.31.6_SMP_820 #7 SMP Thu Jun 14 > 20:31:06...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Ah I see the bootcmd needs to change. fw_setenv bootcmd_linux 'setenv bootargs $(bootargs_linux); ide reset; ext2load ide 0:1 $(loadaddr) /uImage; ext2load ide 0:1 0x01100000 /uInitrd; bootm...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi Buttzy, I have tried to follow your instructions but they are not specific enough for me to follow. I have downloaded your script. I don't have any other way to prep the disk so I commented back in...
View ArticleRe: dpf-ax: unsupported dpf - requests
@BmD_Online Thanks for the info. So "keenox_1026" it will be. :) PNGs for the splashes are in the attachment. superelchi
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
mgazza Wrote: ------------------------------------------------------- > Hi Buttzy, > I have tried to follow your instructions but they > are not specific enough for me to follow. > I have...
View ArticleRe: SATA boot - Solved
Thanks Bodhi! :) Im very lucky because You have Goflex NET and you are able to update kernel, uboot, rootfs... Thank you good. :) Followed Your updates I've got the best NAS user experience.... Fresh...
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
I had forgotten I had a new computer without serial cable drivers since I could not get netconsole to work (I forgot to set the local ip! HA!) Well, I booted into an old rootfs of yours I had on a...
View Article