Re: Can't boot from SATA after power fail goes into Rescue
It looks very good. Now when you plug in the HDD,what dmesg says?
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
The HD was plugged in! I have not removed it. I will shutdown, do a reboot without it and a reboot with it in. Can I hotplug the SATA HD? I can try that and look at dmesg if it would help but don't...
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
optim Wrote: > Can I hotplug the SATA HD? I can try that and > look at dmesg if it would help but don't wnat to > do it if thats a no-no. Back up the HDD first. For the GoFlex Home/Net, yes...
View ArticleRe: [libst2205] HighBox Apache 2.4" hack problems
News from today : I confirm my device have only 1Mb (nothing is specified on the box). Using patched phack (forcing flash_size = 1024) : - I can flash memory correctly, but firmware flash doesn't...
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
from hotplu: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [ 1551.321115] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect [ 1551.327851] ata1: SError: { PHYRdyChg...
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
It seems to be occasionally resetting now [ 1596.014795] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [ 1596.022478] ata1: edma_err_cause=00000010 pp_flags=00000000, dev...
View ArticleRe: Can't boot from SATA after power fail goes into Rescue
Some more errors: I see at least one time it saw the hard drive I didnt notice this when it was active, but now it says its a non-existant drive. [63764.678293] scsi 0:0:0:0: Direct-Access ATA WDC...
View ArticleRe: [libst2205] HighBox Apache 2.4" hack problems
I give up : I will return this DPF and will buy another one.
View ArticleRe: Booting Debian on Pogoplug Pro
The oxnas install script I wrote covers the location,and page-cleaning pretty clearly. If not there, then the kernel updater script does.
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
That would be great, guys! I've gotten lost hunting around. A kernel that loads a machine dependent device tree but boots on all the various platforms sounds great. I just experienced the unrecognized...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Tj, Your problem is with machid. It needs to be set to the hex value of 3542. Set it in console.
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
@bodhi So what version are we going to match against?
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
@WarheadsSE It should be 2013.10, same as in this thread (2014.01 is not out yet): http://forum.doozan.com/read.php?3,12381
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
And where are your sources for those?
View ArticleAn Important Role in a Wedding Ceremony - Flower Girl
I think that maybe everyone has an experience of attending a wedding ceremony. Am I right? As for a wedding ceremony, in addition to the bride and the bridegroom, the bridesmaid and the groomsman also...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi bodhi, thanks again for your effort to bring 3.12 mainline kernel to our kirkwood arm devices !!, on NSA320 and iConnect everything is running smoothely, exept some minor quirks, please add ---...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi pgb4, Thanks for your NSA320 contribution! I will incorporate your config changes and LED settings to the next kernel/rootfs release. It's good to know the ide1/2 trigger works on NSA320 also (some...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
I've got the original sources pulled from ZyXEL for 310/320/325, so when we start in on that unified uboot tree, that should help greatly. I'll have a look at those settings for the Arch kernel as well.
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Warhead, I will be back home in about a couple weeks. Will do it then.
View Article