Re: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Alright, I checked and there is no issue with the ALARM patch and building nsa3xx-hwmon AFAICT
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Alright, we'll slate it for Feb
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
I can confirm that ide-disk* triggers work fine on my NSA320. I'm using version 3.12.0-kirkwood-tld-1. pbg4, Do you have any experience with the gpio buttons using bodhi's kernel? Włodek
View ArticleRe: Unable to boot Debian on Pogoplug E02
I have a pogoplug E02, i installed Archlinux ARM and didnt know what to do as Pogoplud~ was coming after SSH, so I plugged a different usb and tried something which made my pogoplug not accessible,...
View ArticleUpdate broke dependencies - samba no longer available
I have been running Debian Wheezy on my pink PogoPlug for a year or so now and just recently samba quit working and I can't seem to get it installed again. I don't know if it was an update that I...
View ArticleRe: Unable to boot Debian on Pogoplug E02
ch, I am no E02 series expert but it sounds like the rescue kernel has been made non-functional somehow. If you have the serial console, I would reload the Doozan rescue kit using the serial console,...
View ArticleRe: Unable to boot Debian on Pogoplug E02
ch, Other than using serial console, you can try to boot with my latest rootfs (in my signature). See instruction to put it on a USB thumb. After you've booted into Debian, SSH in and then you could...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hello, I found this DPF in a local Kohl's. It's branded Kodak G240. The PCB has a S/N sticker that reads "SAKAR-VIVITAR". identify.py: Looking for firmware.............: Found (buildwin, 320x240 px)....
View ArticleRe: dpf-ax: unsupported dpf - requests
@Michael Please try attached fw. Very unusual brightness control routine - please make sure that the brightness adjustment works correctly. superelchi
View ArticleRe: How To Install PBX With GUI
STuPiDiCuS Wrote: ------------------------------------------------------- > You could try FusionPBX, I run it on my Debian v4 > pogoplugs just fine. It'd run even better on an > E02. >...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Hah, I *just* started poking at the linux-kirkwood-dt kernel package again today. If there is going to be an effort to get an updated FDT u-boot rolling for as many of the Kirkwood boards as possible,...
View ArticleRe: dpf-ax: unsupported dpf - requests
@superelchi Thanks! The brightness control does act a little odd. 1-19 works normally, with 19 being the brightest. 20, and 21 seem to be the darkest. I also noticed the up/down buttons are reversed.
View ArticleRe: dpf-ax: unsupported dpf - requests
I bought a pdf,named pt824，not pt824a，display:2.4 TFT,16MB, can store 100pics。 240*320， Running on windows - unable to detect flash size Reading 100000 bytes from flash... Flash written to file...
View ArticleRe: dpf-ax: unsupported dpf - requests
@Michael You are right - there are only 19 valid brightness steps. Please try attached fw. I also swapped the buttons... @nonzhe Please try attached fw. superelchi
View ArticleRe: dpf-ax: unsupported dpf - requests
superelchi : Thanks you very much！ The brightness control problem ： step 21 is not the brightest,step 12 is the brightest.
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi, @racic for the gpio events and bodhi's new 3.12 kernels you can use esekeyd which works slightly better than the input-event-daemon (the other alternative), simply apt-get install esekeyd and...
View ArticlePogo v2, wheezy on stick + additonal usb3.0 hdd. how?
Hi, what happend till now: I installed debian squeeze with the dockstar script on 2gb usbstick (mounted to a pogo e02) and upgraded it with apt-get to wheezy. on the nand I installed the rescue system...
View ArticleRe: Pogo v2, wheezy on stick + additonal usb3.0 hdd. how?
edit: upgraded to kernel 3.12.0 with the manual here. but nothing changed.
View ArticleRe: Automount USB drives
bohdi, This is my current startup mount script. I still use pmount but you see its expanded since my original those years ago. It cleans up all stale mount points left over from an ugly shutdown...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
List of Kirkwood devices I have: - GoFlex Net - Pogoplug V4 (not mobile) - ZyXEL NSA320 - ZyXEL NSA325 - USI Topkick (the reference design the TonidoPlug 2 is based on)
View Article