Re: Conditional boot with DLINK DNS325 original U-boot
Maybe you could work around the bootarg problem by using kernels that you compiled yourself. This way you could tell the kernel to use hardcoded bootargs instead of the ones provided by uBoot. This...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
I've got a ZyXEL NSA310. Would be glad to help out!
View ArticleRe: How does Transmission work with non-uPnP router?
Did you tried with rtorrent and looked at the rtorrent logs libtorrent would better some better info on it.
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Thank you for your hard work! Please keep it up! Works fine on NSA325v2. Are there any plans about submitting it to the Debian Project?
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Quotebodhi And the color of the LEDs should be what you choose to set, not the kernel. no, using that patch, the kernel will choose color by testing write/read state of sata-disk. sata-disk LED is...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
nekitip, See this post by pbg4 for setting NSA3xx LEDs. http://forum.doozan.com/read.php?2,12096,13642#msg-13642 It is the normal way to control the LEDs in all these Linux ARM boxes. The color for...
View ArticleRe: Conditional boot with DLINK DNS325 original U-boot
bodhi Wrote: ------------------------------------------------------- > Now the good news :) the DNS325 is supported in > the latest uBoot, so I might be able to built it. bodhi, thank you for...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
from the command line, works, for example: echo heartbeat > /sys/class/leds/nsa310:red:SATA1/trigger and default-on, timer... but not the echo ide-disk > /sys/class/leds/nsa310:red:SATA1/trigger...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
I have a spare DLink DNS-323 that im not doing anything with at the moment. Would I be able to setup this debian rootfs and kernel on the dns323 like I did with my xyzel nsa325? I know there is FFP...
View ArticleRe: Conditional boot with DLINK DNS325 original U-boot
Ingmar, it worked like a charm! Kernel Config: CONFIG_CMDLINE="console=ttyS0,115200 root=LABEL=rootusb usb-storage.delay_use=0 rootdelay=10...
View ArticleRe: Conditional boot with DLINK DNS325 original U-boot
Great to hear that my little theory worked out like expected.
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
Hi, @SOL may be I am wrong, but isn't your DNS323 an ORION type of SOC with a 500 MHz Marvell 88f5182-a2 core??,... so provided you have a uboot which is able to boot from usb and a newer kernel which...
View ArticleRe: dpf-ax: unsupported dpf - requests
@nonzhe Still could not find anything unusal. So the pragmatic approach - I limited the number of brightness steps to 0 .. 12. :-O Please try if brightness now works correctly. superelchi
View ArticleRe: [Hosting] Comments on hosting Starbound Server.
Not unless they package a ARM binary as that seems to NOT be open source. Even then, lord knows what the requirements are until the post them clearly.
View ArticleRe: dpf-ax: unsupported dpf - requests
The brightness now works correctly! Thank you very much!
View ArticleRe: Conditional boot with DLINK DNS325 original U-boot
ingmar_k Wrote: ------------------------------------------------------- > Great to hear that my little theory worked out > like expected. Nice solution!
View ArticleRe: dpf-ax: unsupported dpf - requests
superelchi Wrote: ------------------------------------------------------- > @oberseeler > > Please try attached fw. > > superelchi It's working perfectly! thank you very much!
View Articlebad crc and ro serial console unbrick?
I tried to restore uboot to facotry and ended up with bad checksum. I messed up the pad by the rx pin so i cant write from serial console. here is what happens on boot: U-Boot 1.1.4 Cloud Engines...
View ArticleRe: bad crc and ro serial console unbrick?
Yes, setup tftp on another Linux or OSX box and flash the current uBoot image. In the example below, 192.168.0.100 is the ip address of the other Linux box 192.168.0.200 is the ip address of this...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
@bohdi, Sorry I was away. I couldn't boot this kernel on my NSA320 with the default generated initrd. Strangely, I couldn't even boot it without an initrd using a direct /dev/sda root. I manually made...
View Article