Re: bad crc and ro serial console unbrick?
I didn't stress the point that I destroyed the through hole of the rx pin so I cannot interupt anything via serial console. I am going to try to solder to the trace or something but I was wondering if...
View ArticleRe: bad crc and ro serial console unbrick?
OK I missed that update. (and I looked for it when I saw that the post was updated.... ) yes it is interesting. Its a kirkwood (goflex home). thanks
View ArticleRe: bad crc and ro serial console unbrick?
earl, If it's a GoFlex Home then try UART booting: http://forum.doozan.com/read.php?3,7852,7852 And you can use uBoot image from this thread for UART booting: http://forum.doozan.com/read.php?3,12381...
View ArticleRe: bad crc and ro serial console unbrick?
ok! :) up and running. mostly. I got into this trouble because I was trying (no good reason [which is in itself a good reason]) to restore to factory uboot. still can't, there is something different...
View ArticleRe: bad crc and ro serial console unbrick?
Your rescue system arcNumber must be something other than the GoFlex Home (3338). Looks like it's a Dockstar. Check it with: fw_printenv arcNumber But before setting this arcNumber, make sure you can...
View ArticleRe: bad crc and ro serial console unbrick?
I set up net console and have my serial console hotglued in and back in the case just to hope. I already set my arcnumber to 3089 and it recognizes sata drives. but i am not sure if it will boot from...
View ArticleRe: Cannot boot v3 kernel on PogoPlug E02
Hi Millerdev and Bodhi, not to necropsy, but I have come to this same issue. Everything was working great except for the annoying orange LED. A quick google turned up the fw_setenv machid d66 and sure...
View ArticleRe: Cannot boot v3 kernel on PogoPlug E02
Guess I was up too late, in the morning the fog cleared, I did a bit more googling and then it hit me. My mental model was that the fw_setenv is something in the OS, not on the uBoot image (in the...
View ArticleRe: bad crc and ro serial console unbrick?
with arcNumber 3888 I get: Error: unrecognized/unsupported machine ID (r1 = 0x00000d0a). Available machine support: ID (hex) NAME 00000690 Marvell DB-88F6281-BP Development Board 00000691 Marvell...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
I'm attempting to download an install this kernel. I am at the root of my debian USB stick, made a backup of my boot folder, ran: wget --no-check-cert...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
@ubermacin do you even have bzip2? try maybe bzip2 -dc linux-3.12.0-kirkwood-tld-5-bodhi.tar.bz2 | tar -xf - @krakqh3d, I tried with kernel 3.13.1, same thing. Runs loaded from HDD, not from rom (bad...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
...oh, and yes, in config, you must put * next to, or edit .config manualy to set: CONFIG_ARM_APPENDED_DTB=y it was described here, but he has compiled it on device itself.
View ArticleIs there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Dear all, hello everyone. I'm wondering if there is any possibility for upgrading a u-boot in my old Netgear Stora? Right now it's running on U-Boot 1.1.4 (Sep 4 2009 - 09:36:11) Marvell version:...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
w00t! thanks nekitp! That was the problem! Unbelieveable, I spent at least an hour googling that issue and never seen anyone ask about that. For future fellow n00bs: apt-get install bzip2 This is a...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
The newest 3.12.0-kirwood-tld-5 worked like a champ (once I got my bzip2 errors figured out LOL) on my E02. Here is how it played out (dunno if the errors are benign): root@debian:/tmp# apt-get remove...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
nekitp Wrote: > If you are lucky, it wil also blink leds. On > nsa310 it does not. > cat /sys/class/leds/nsa310:green:hdd/trigger > shows > none nand-disk timer oneshot heartbeat gpio...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
ubermacin Wrote: ------------------------------------------------------- > > debconf: unable to initialize frontend: Dialog > debconf: (No usable dialog-like program is > installed, so the...
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
The Stora stock uBoot is quite old. Running newer uBoot in memory will not work. I'll take a peek in uBoot source to see if anything is similar to this box. You can also Google it to see if anybody...
View ArticleRe: bad crc and ro serial console unbrick?
Earl, The reason is that you are running GoFlex Net uBoot by davygravy (installed by Jeff's script). This works because the GoFlex Home is a closed cousin of the GF Net. The LEDs must be set in Debian...
View Article