Re: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
BigRon, Unfortunately, I2S support is not turned on in the current kernel! But I could include that in the next released version.
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
Dave Wrote: ------------------------------------------------------- > bodhi - can you pls verify if hiddev is enabled in > your kernel when it was compiled? i see its > enabled in the config...
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
Thank you bodhi for considering activating/implementing I2S Support into the next kernel Build!. Could you also implement I2C and SPDIF Support? ... If you can not implement the other features besides...
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
Bodhi - Thanks for the prompt response. Output from dmesg : [52247.653548] usb 1-1.3: new low-speed USB device number 4 using orion-ehci [52247.808800] usb 1-1.3: New USB device found, idVendor=051d,...
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
@Dave & Ron, I'll include the requested config options in the next release. You can test it, then! @Dave, I saw some unchecked config switches under HID. Perhaps include them will cover your UPS....
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo E02
Klaus and TJ, I will upload new uBoot images with SNTP support, in a couple days.
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: > @Dave, > I saw some unchecked config switches under HID. > Perhaps include them will cover your UPS. But out > of curiousity, if you still have the older kernel > files,...
View ArticleRe: [Pogoplug Mobile] Install uBoot/Debian
Some soldering and burns later, I've managed to get a dump from the console. Looks like it's looking for a /dev/sda1 as the root filesystem, set by the environment variable 'usb_root', but that isn't...
View ArticleRe: [Pogoplug Mobile/Series 4] Install uBoot/Debian
I did mention about putting the rootfs on a USB thumb drive in the post above! For USB the boot device is sda1. For SD card, it should be mmcblk0p1. See this post.
View ArticleRe: PeerGuardian / MoBlock on armel debian alternative ?
Hi, The easiest way to have a working peerguardian is to compile it by yourself. Download the source files on Sourceforge project and compile it using the lowmem setting and disabling the QT...
View ArticleRe: dpf-ax: unsupported dpf - requests
Yeah. Right. My fault. How about this fw? superelchi
View ArticleRe: dpf-ax: unsupported dpf - requests
thanks for spending your time. now: 1-19 bright but no difference, 20 darker , 21 black
View ArticleRe: Use netconsole to troubleshoot uBoot without a serial cable
I found this thread after following Alice down the rabbit hole... I'm having problems getting netconsole to help troubleshoot my GoFlex Home problems. Back in September of 2013, I installed Arch Linux...
View ArticleRe: Use netconsole to troubleshoot uBoot without a serial cable
beausoleil, > I'm confused as hell about using nc. Does Jeff's > uboot image run nc by default, or does it have to > be manually setup? I don't have a USB-serial cable > converter, so I...
View ArticleRe: dpf-ax: unsupported dpf - requests
So - more or less the same as with the first version... Could you please try this test fw? I do not think it will work - but who knows :) superelchi
View ArticleRe: dpf-ax: unsupported dpf - requests
Hi Superelchi, you're thinking wrong. This one works as it should. No black screen and setting 1 is the darkest. Thanks again Steve
View ArticleRe: dpf-ax: unsupported dpf - requests
O boy - all this hassle with the fw-specific brightness routines - and the "standard" routine works. :O So I will mark this one as "working". Thanks for the quick answer! superelchi
View ArticleRe: Is there a newer u-boot for Netgear Stora (RD-88F6281A LE)
Hi Bodhi, can you please help me with something? at start please take a look at this guide - OpenStora Wiki - Compile the kernel. The author is using 'gitk' utility to obtain necessary patches, that...
View ArticleRe: Rescue system for use with USB sticks and TFTP
Hi! I stumbled to this thread after some very serious Googling about "How to UnBrick Dockstar". Happened so far: I got this Seagate DockStar from friend, who tried to install Debian into it but failed...
View Article