Re: uBoot problem
http://forum.doozan.com/read.php?4,3896 i found this POST, and now have a RESCUE SYSTEM INSTALED.. and now? -bodhi THANKS FOR YOUR HELP, sorry for MY english
View ArticleRe: uBoot problem
Ornella, No problem :) Just plug in the USB rootfs that you've created above Using this post: http://forum.doozan.com/read.php?2,12096 i have DEBIAN runing, reinstaled uBOOT with this commands: and...
View ArticleRe: Dockstar - New USB Stick - Yellow LED blinking after restart
If possible try the Windows-Tool "USB Image Tool". I would suggest to use version 1.59. It did the trick for me, later versions seem to have different problems. You can get it here:...
View ArticlePogoplug E02 - Cold boot works but reboot doesn't
I have a Pogoplug E02 and I installed uBoot through the script http://projects.doozan.com/uboot/install_uboot_mtd0.sh I'm trying to get ArchLinux running from a 4TB Western Digital MyBook, so I...
View ArticleRe: Pogoplug E02 - Cold boot works but reboot doesn't
YodaJM, My guess is it could be that either : Arch (I meant your system specifically, not in general) shutdown process is a little bit too quick, or the 4TB WD Mybook powerdown takes a little too...
View ArticleRe: Pogoplug E02 - Cold boot works but reboot doesn't
Thanks for the reply bodhi. So far adding a sleep command and a 2nd/3rd usb start seems to have no effect. It always says "Device NOT Ready" followed by 6 "EHCI timed out on TD". I'm a Linux noob for...
View ArticleRe: Dockstar - New USB Stick - Yellow LED blinking after restart
I think the problem was my usb stick. I bought a new bigger stick from the working modell (Transcend), and this is now working. Thx for your help :-)
View ArticleRe: Pogoplug E02 - Cold boot works but reboot doesn't
YodaJM, I'm not familiar with Arch Linux (using systemd), so afraid I can't help you there. It was just a thought to some possible tweaks to see if it helps. Perhaps the ALARM guys know whether it is...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Hi there, I have a Pogoplug E02 and everything went fine following the installation steps. Pogoplug:/tmp$ cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
jadefalcon100, The installation assumes the current U-Boot on your Pogoplug is what Jeff's script installed.That has the U-Boot env already at 0xC0000. So there would be now CRC error. - Which U-Boot...
View ArticleDavy Gravy's uboot for series 4 mmc card
Having small issues with a fresh series 4 I picked up from adorama. Nothing too bad, followed instructions that are linked to my user name on the boards and didn't have any issues changing the...
View ArticleRe: Davy Gravy's uboot for series 4 mmc card
t3ch42, > The problem I find now is my SD card is not > recognized every so often or displays corruption. > I have net console installed, so its only a matter > of resetting the loader,...
View ArticleRe: Pogoplug E02 - Cold boot works but reboot doesn't
It doesn't matter how many times I do a USB start, it always says Device NOT ready followed by 6 timeout messages. I did a USB stop, then unplugged the hard drive and plugged it back in. I then did a...
View ArticleRe: Pogoplug E02 - Cold boot works but reboot doesn't
Currently, Arch and Debian are different in systemd vs. sysvinit, i.e startup and shutdown, among other things. Debian will switch to systemd in jessie as a stable release. Definitely, 1 second is...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Hi Bodhi, I had Jeff's original uboot installed (the one from the script on http://projects.doozan.com/debian/) Don't ask me about the Version Number. ;-) NetConsole worked fine before flashing, I...
View ArticleRe: Davy Gravy's uboot for series 4 mmc card
Yes, you got the gist of my intent from the post. My apologies for being unclear. I assume that the issue is in the uboot for the occasional inability to recognize the card. Wasn't sure if it was a...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
jadefalcon100 Wrote: ------------------------------------------------------- > Hi Bodhi, > > I had Jeff's original uboot installed (the one > from the script on > http://pro >...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Here is the thread: http://forum.doozan.com/read.php?3,7477,10982#msg-10982 Look for this section: - Flash uboot.environment to 0xC0000
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
It worked. Flashing uboot.environment removed the bad CRC! Thank you very much!!! Jade
View Article