Re: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
jadefalcon100 Wrote: ------------------------------------------------------- > It worked. Flashing uboot.environment removed the > bad CRC! > > Thank you very much!!! > > Jade Damn....
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
ebbes, I would send you my spare V4, but shipping it to Germany from USA in a padded envelope would still cost 4x the actual price of the device... :-! Thanks for your efforts on this so far, I will...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Jade, If the ethaddr is not defined, then the kernel won't bring up ethernet network. But the kernel should boot OK. Just that you don't have network connection. The best way to recover is to connect...
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > @Dave & Ron, > I'll include the requested config options in the > next release. You can test it, then! > >...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
Jade, Which kernel version are you running on this Pogo E02 rootfs?
View ArticleRe: Linux Kernel 3.13.1 Kirkwood package and rootfs (Non Flattened Device Tree)
notmine, Thanks for your report about the CyberPower UPS! good to know it works.
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Today I finally got my Pogoplug V4 and after soldering a uart connector, I can reproduce the problem. I can confirm that the hard drive does not spin at all while it's working when using external...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
ebbes, We might have to reset the SATA PHY. My theory is that is was set (in error) to a Shutdown state, thus need to be brought up to Operational by U-Boot.
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
It turns out that it really isn't mvHddPowerCtrl that turns on the HDD... Even converting it to a dummy would still spin up the HDD. bodhi Wrote:...
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
Hi. I have Iomega ix4-200d device. I've just broke original u-boot and now playing with device. I write u-boot from similar device and able to boot via uart and console. I have hardware issues (wrong...
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
vasichkin Wrote: ------------------------------------------------------- > Hi. I have Iomega ix4-200d device. I've just broke > original u-boot and now playing with device. I > write u-boot...
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
bodhi Wrote: > What you should do is Google for the patch, i.e. > board file. If you can find an old version of the > patch, I will then retrofit it for current U-Boot. > Without some...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Don't want to do an EDITā¶. And this post is possibly interesting. At least I think so. U-Boot 2014.01-pogoplugv4-dirty (Mar 19 2014 - 15:01:20) Pogoplug v4/Mobile SoC: Kirkwood 88F6281_A1 DRAM: 128...
View ArticleRe: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
you were right, Bodhi. the Plug bootet normally, but halted at the very beginnig of the boot sequence in the moment he did not find a mac address. So interrupting with serial console did the trick. I...
View ArticleRe: Pogoplug E02 Won't Boot From USB
@ Bodhi, I got everything working now. As you noticed I had booted in to the Pogo OS because debian was not booting, but I have it worked out now. I appreciate the help.
View ArticleRe: Davy Gravy's uboot for series 4 mmc card
t3ch42 Wrote: ------------------------------------------------------- > My > apologies again,( but for running on this time) is > the version with ebbes patch a "cleaner" uboot? > Trying...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Great works, ebbes! You've just made the Pogo V4 much more interesting for a lot of people :) Who would have thought that the solution was in plain sight alll along:)
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
bodhi Wrote: ------------------------------------------------------- > Great works, ebbes! You've just made the Pogo V4 > much more interesting for a lot of people :) > > Who would have...
View ArticleRe: Davy Gravy's uboot for series 4 mmc card
Well, as of today, it won't fail. I have USB WiFi devices plugged into the top usb and top usb3.0. I tried rebooting 8 times and no problems booting up each time. Weird. I look forward to testing your...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
I think our (my) mistake was making the wrong assumption that the 6192 is the same as the 6281 chip in this regard :) If you look at the GoFlex Net/Home patches, there is no need to trigger the GPIO...
View Article