Re: 2013.10 U-Boot for FDT and Non-FDT Kernel - GoFlex Net/GoFlex Home/Pogo...
jade, > The reboot worked fine and everything is back > online. > Cool! > > BTW: I'm now running kirkwood 3.13.1 + rootfs from > your other post Were you running this rootfs when you...
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
vasichkin, > I > found thread on this forum > kernel > patch to support sensors and buttons > ix2-200 > [url=http://lists.infradead.org/pipermail/linux-ar >...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
I rather think this is by PCB design. GoFlex Net seems to have SATA directly powered. 6281 does also have SATA ACTn GPP modes.
View ArticleRe: Davy Gravy's uboot for series 4 mmc card
My current build is available here. But please don't test it unless you've got working serial connection until it's been confirmed to work by more testers. Regarding your Mac Address: Does printenv...
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
I've got luck to compile U-boot from here (GPL sources) It contains modified sources of u-boot 1.1.4. I was able to load compiled u-boot, but it still reports less RAM than i have (128 instead of...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
Interesting! Time to try my pogo v4.
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _...
View ArticleRe: Newer U-Boot for FDT and Non-FDT Kernel
vasichkin, Do you have the boot log with original U-Boot? did it show the correct RAM?
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
By the way: does anyone know how to boot stock Pogo software with a recent U-Boot? I tried it, but it always fails (i.e. no further output) after Uncompressing Linux... booting the kernel.
View ArticleRe: [Pogoplug Mobile/Series 4] Install uBoot/Debian
Hey bodhi, I followed this and installed the debian 3.13.1 rootfs on a Pogoplug Mobile. However, the Mobile unable to get DHPC address from the router. Do you know how to set up the network interface?...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
It might not like `mainlineLinux=yes`, but I can't say for sure.
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
I actually set mainlineLinux=no, but I doubt it has any effect: there is no reference at all to this env variable. However, in original U-Boot, there are some references: static void setup_ce_tag...
View ArticleRe: [Pogoplug Mobile/Series 4] Install uBoot/Debian
toomyzoom, The rootfs should have no problem getting DHCP address automatically. Do you have a boot log or dmesg log that we can look at?
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
ebbes, Do you have the original u-Boot envs still in in location 0xa0000 ? cesvcid=xxxxx ceboardver=PPV4A3 … ...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hi superelchi, i have a display which was recognized as followed: Manufacturer: Winbond Size : 2 MB Reading 200000 bytes from flash... Flash written to file 'fulldump_20140321-165623.bin'. Looking for...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hi superlechi, i tried dhgate.bin and it works perfectly :-) Thanks anyway. Lars
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
When I boot an old U-Boot image via UART, these appear in environment, so I assume they're still there. However, this should not be the problem cause they are definitely not passed via ATAG, so they...
View ArticleUpgrade older PogoPlug Mobile flash to newer?
Hi, I've come a long way to making NetBSD easy to install on PogoPlugs thanks to a lot of help from bodhi. My HOW-TO can be found here: Install NetBSD on a PogoPlug One of the things I've noticed is...
View ArticleRe: Kirkwood U-boot - Getting all supported Kirkwoods on-board
My old Pogo kernel boot log: 0.000000] Linux version 2.6.31.8 (afenn@kt) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #5 Wed Sep 28 12:09:12 PDT 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision...
View ArticleRe: Upgrade older PogoPlug Mobile flash to newer?
johnklos, Use nanddump and nandwrite in Linux. Simplest. Remember to make sure the nandwrite uses the correct option that nanddump used regarding OOB. Also make sure to look at the usage for nanddump...
View Article