Re: GoFlex Home total brick
My GoFlexHome is not working :-( Followed the ArchLinux 16 step install guideline from http://archlinuxarm.org/platforms/armv5/seagate-goflex-home. After reboot no response. Green LED is blinking....
View ArticleRe: GoFlex Home total brick
Download the GoFlex Home u-boot from this thread: http://forum.doozan.com/read.php?3,12381 And use serial console to boot with UART method (kwboot) as described in this thread:...
View ArticleRe: Rescue V2.8.2 : many enhancements + full kernel support for...
I just installed 2.8.2 on my Pogoplug E02. I was able to successfuly boot into rescue via netconsole.
View ArticleRe: Upgrading my Pogoplug
Well, I tried upgrading the U-Boot using the automated script, but it seems that I have the latest version as per that method. However, it's still a number of years old. I'm now trying to boot...
View ArticlePogoplug Mobile V4-A1-01 troubles
Hello, I just bought my first pogoplug, and decided to play around with it. I follow the directions at archlinux for the Pogoplug Series 4. After I was done, I was left with a flashing green light. I...
View ArticleRe: Upgrading my Pogoplug
agiorgio, Looks like you are using hybrid MBR, did you create the partitions using the instruction here? http://www.rodsbooks.com/gdisk/hybrid.html
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
jeepster, You have connected serial console, but no need to do UART booting yet. Perhaps the problem is quite simple to see on serial console. - First connect the serial console from your...
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
Here is what I got U-Boot 1.1.4 (Oct 1 2011 - 12:21:35) Cloud Engines 1.1.2 (3.4.27) PHYADDR=0 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006918B4 Soc: 88F6192 A1 (DDR2) CPU running @ 800Mhz L2...
View ArticlePartition and Format SDCard from Pogoplug OS on PP Mobile
Hello, I need a little help understanding what's going on. I'm trying to partition, format and setup the debian rootfs on a SDCard straight from the default Pogoplug OS. When I insert my SD Card,...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hi superelchi, I bought a Zipp dp605 from BigW. The packaging looks exactly the same as the image CaptainCheeks posted last year but the firmware is different. $ ./identify.py -v...
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
jeepster, USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... T Device NOT ready Request Sense returned 00 00 00 1 Storage Device(s) found...
View ArticleRe: Partition and Format SDCard from Pogoplug OS on PP Mobile
Does the mmc device appear under /dev/disk? if it does not appear there then the Pogo OS udev (if it uses udev) did not detect the mmc. It might use some hotplug process to do this, though. ls -lR...
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
Ok, I'll give it a try although I do question one thing....... I have the mobile verison not the V4 with the sata and usb3 ports. Mine is the stripped down version with just one USB2.0 port on the...
View ArticleRe: Partition and Format SDCard from Pogoplug OS on PP Mobile
Thanks for the reply. /tmp # ls -lR /dev/disk/ ls: /dev/disk/: No such file or directory /tmp # ls -lR /dev/mmc* ls: /dev/mmc*: No such file or directory /tmp # ls /dev/sd* /dev/sda /dev/sda4...
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
Ah. That's made it simpler with only one USB port. And that link currently the only way to install with a script. Later when you have booted into Arch succesfully, you can come back and install the...
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
Thank you bodhi! You're the best! Yesterday when I followed the instructions on the arch site for version 4 I was pretty sure it worked unitl I powered down, I did the /sbin/reboot and I think it was...
View ArticleRe: Pogoplug Mobile V4-A1-01 troubles
bodhi Wrote: > Later when you have booted into Arch succesfully, > you can come back and install the new U-boot which > I will upload today or tomorrow in > this > thread. @bodhi, Can I...
View ArticleRe: Allwinner A20 like Banana Pi
Okay I thought so. Anyway the stock CB2 Archlinux kernel boots up on the BPi, but after loading the sunxi-gmac module, I still get only 100 Mbps. That's after ethtool adjustments. Manipulating the...
View ArticleRe: Rescue V3.0 : A work in progress ... wanna help?
Hello, I would like to request that the full blown wget be added (versus the wget provided by busybox) for https support, now that dropbox is redirecting all http downloads to https. Thanks gray
View ArticleRe: No Download from Drobox?
Sorry, you mentioned ArchLinuxArm and then Rescue System v2.8.2 so I was a little confused. The rescue system is actually based on Debian not ALARM. Doesn't look like the rescue system has apt-get or...
View Article