Re: U-Boot for Device-Tree Kernel
Of course you're right! I turned on debug for both netconsole and hush parser. Hush parser works with no problem. Netconsole was the problem since it echos back the incompeted command string before...
View ArticleRe: Best way to revive my Pogoplug E02?
ian, How long have you waited before trying to log in through ssh? which file system is on your USB, ext2 or ext3? If it's ext2, then take the stick to a different Linux box and run e2fsck to check...
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
bodhi, Having the same page allocation failures on kswapd, swapper, smbd and ksoftirq when copying large amount of data (~1T) over samba and GbE link. swap remains intact as syong mentioned before....
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
> > p.s. a few blogs/forum threads related to openwrt > and similar lowmem devices I've found recommended > setting /proc/sys/vm/min_free_kbytes at least 8192 > bytes to eliminate this...
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
bodhi, sorry, not 8192 bytes, but 8192 kbytes (8M). people said this mem is used for kernel purposes, someone even advised to set 64M for that, lol. I've tested this for a few hours and it seems to...
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
SiruS, I think you probably solved this with this solution! we will see if the error repeat. But looking at the explanation for memory tuning at openSUSE site, it is very specific how this number...
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
bodhi, here's fresh and detailed explanation of things get happened: http://www.yaleman.org/2013/02/03/linode-swapper0-page-allocation-failure-issue/ ~# cat /proc/sys/vm/min_free_kbytes 1442 default...
View ArticleRe: Crashplan on PogoPlug
Hi fellas, It looks like the openjdk 6 is no longer in the repository and unable to be installed using pacman... I have followed various instructions including this one to up til the openjdk 6...
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
SiruS, I will upload kernel 3.8.11 in a couple days.
View ArticlePogoPlug Mobile SD Boot Troubles
Hello, I am having some issues getting my Pogoplug mobile to boot from an SD card. I'll say up front that I am no linux expert so if there is anything unclear or additional information needed please...
View ArticleRe: Rescue V2.8.2 : many enhancements + full kernel support for...
Der Freibeuter Wrote: ------------------------------------------------------- ... snip ... > 3. Whe i got both files i should download > flash_erase and nandwrite: > > wget >...
View ArticleRe: ZyXEL NSA320 install from scratch
Hi guys, by 'his method', davy is referring to this post, but seeing how old this post is, you probably know that already. Myself, I am at the point where I can boot from a USB-drive (but not just any...
View ArticleiConnect not boots from Stick when DVB-C Stick plugged in
Hello. I will try to explain my problem with my bad english. Sorry for this. I have an iomega iConnect debianized with this Tutorial: http://www.congenio.de/infos/iconnect.html All runs good. I will...
View ArticleRe: Linux Kernel 3.6.11 Kirkwood package (Non Flattened Device Tree)
Using the kernel patch (against standard Linux source 3.9.2) that can be found at archlinuxarm and making a few amendments to the archlinuxarm .config file, kernel 3.9.2 compiles and loads cleanly for...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
Sven Wrote: ------------------------------------------------------- > You could try my 3.8.4 with NSA320 enabled: > https://www.dropbox.com/sh/ifotsfsca9kqg7q/Dda2OXW > SdZ Hi Sven, thank you...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
I tried to keep it as small as possible, but you're right - I could have compiled it at least with IPv6 modules... You could do so yourself using the provided DIFF to apply the changes to the original...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
Hi sven! Thx for your quick response! Currently I compile a kernel with ipv6 enabled on my pogo plug (it takes a little bit time ;-) ). If so far it contains all I need, I would post the modified...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
All credits go to Jeff and Davygravy: http://forum.doozan.com/read.php?2,524 But in newer crosscompile you'll need to use a workaround to compile armel packages... I'll try to find my steps to use...
View ArticleGetting nowhere with SATA boot -- please disregard ...
Having finally given the disk an msdos partition table (and, if I had a 3TB disk, I would give it a hybrid one like for the GoFlex Home ...), this post has become obsolete ... Sorry for the confusion...
View Article