Re: Zyxel NSA320 : basic support for Debian installation
Hi chessplayer, boot_sata1 (or 2) is the bootcommand to use. You probably created the partition on another computer and yor NSA320 does not recognise the partition. The problem obviously lies here:...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
HellG, as you can see, my stupid entry has gone and I have apologized for the confusion. Now, I also apologize for stealing your time ... Sorry and thanks for taking the time. However, I believe the...
View ArticleRe: PogoPlug Mobile SD Boot Troubles
sosuke, Looking back at Davy's thread: The rootfs is packaged as an ext3 image (kirkwood-debian_image.img) so you'll have to mount with the loop option, and cp -a the contents onto a preformatted sda1...
View ArticleRe: iConnect not boots from Stick when DVB-C Stick plugged in
First step, please post your output of fw_printenv from Debian. And also describe your setup a little more: if I understood correctly, the other 2 sticks are USB ? plugged into the front USB ports?
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hi guys, has anybody been able to use the uBoot/rootfs from the first post with the NSA325? It does seem to offer quite a bit more bang and is currently available for 99,90€ ... Cheers, chessplayer
View ArticleRe: iConnect not boots from Stick when DVB-C Stick plugged in
Hello. First the output of fw_printenv: baudrate=115200 loads_echo=0 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 usbstart=usb start run_diag=yes console=console=ttyS0,115200...
View ArticleRe: Crashplan on PogoPlug
I got Crashplan running on my Pogoplug 2 running Debian wheezy using eas's script I had to edit a few minor changes: 1. apt-get instead of aptitude (first line) 2. tar -xf jtux.tar instead of tar -zxf...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
Just for the records: If compiling with make-kpkg fails, try the following command.DEB_HOST_ARCH=armel fakeroot make-kpkg --arch arm --cross-compile arm-none-linux-gnueabi-...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
Ok, here is the 3.8.4 kernel, compiled with ipv6 and netfilter (iptables) support: http://download.prodigy7.de/files/packages/kirkwood/kernel/ Because I've changed the name from dockstar to kirkwood,...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Have anyone able to boot original Pogoplug Linux using this uBoot?
View ArticleRe: GoFlex NET: SATA disk not visible
Because also the 3.8.4 kernel doesn't work flawlessly I am not sure if it is a FW or HW problem. Before I try other things I will try an old Squeeze with an old 2.x.y kernel. Until the device don't...
View ArticleRe: PogoPlug Mobile SD Boot Troubles
Thanks for the response bodhi. That didn't work. I ran setenv usb_rootfstype 'ext3' saveenv Didn't see anything for the SD card so I'm assuming it's the same. But honestly I don't think this would...
View ArticleRe: Crashplan on PogoPlug
hi pogoomane, can you confirm that this setup is actually working and backing up to CrashPlan Central?
View ArticleRe: iConnect not boots from Stick when DVB-C Stick plugged in
pr0, You're running stock uBoot, and this version is very limited in what you can do with uBoot envs. If you are comfortable with flashing new uBoot using a manual procedure (only recommended for more...
View ArticleRe: iConnect not boots from Stick when DVB-C Stick plugged in
Hello. Thanks for this information. I will read the Post and look what I can do. Greats pr0
View ArticleRe: GoFlex NET: SATA disk not visible
shv Wrote: ------------------------------------------------------- > Because also the 3.8.4 kernel doesn't work > flawlessly I am not sure if it is a FW or HW > problem. Before I try other...
View ArticleStupid mistake - brick or recoverable?
Hi guys, unbelievable, but in spite of the red alert text in the first post, i managed to erase mtd1 and mtd2 on one of my Zyxel NSA320s when trying to install the rescue system (wanted to do...
View ArticleRe: Linux 3.3.2 kernel for Dockstar, GoFlex and many others
prodigy7 Wrote: ------------------------------------------------------- . So if the package is > installed with dpkg, directly the uImage and > uInitrd is refreshed in /boot and nothing more is...
View ArticleRe: Linux kernel 3.2.28 Kirkwood package
bodhi, unfortunately, your package does not boot on the Zyxel NSA320, as it does not recognize the machine id (arcNumber = 3956; machid=f74). What must be done to remedy this? Like davy's 3.3.2...
View Article