Need help - Goflex home - uboot corrupted - errors wrting flash
I was moving away from arch to debian on my goflex home and debootstrap gave me incompatible hardware error. I chaged the arch number to dockstar and that action or something corrupted my environment....
View ArticleRe: Bricked GoFlex Home? :(
bodhi Wrote: ------------------------------------------------------- > @dave.opc, > > You are still running as Dockstar. The fw_setenv > in Debian does work (optim is correct that in >...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > derdigge Wrote: > -------------------------------------------------- > ----- > > Thanks for that update man! >...
View ArticleRe: Bricked GoFlex Home? :(
dave.opc, you got it working :) (just what I've suspected, the machid was needed). The installation script must have detected your machine type. But current uBoot version still needs machid to work...
View ArticleRe: Need help - Goflex home - uboot corrupted - errors wrting flash
If your serial console doesn't show anything, it might be that your uBoot in mtd0 has been corrupted. You can try UART booting: http://forum.doozan.com/read.php?3,7852,7852 If this works, then reflash...
View ArticleRe: Bricked GoFlex Home? :(
ok, good i have to do these: fdisk /dev/sdb delete all partitions make sdb1 linux (about 20gb) sdb2 swap (about 1gb) sdb3 linux ext3 (for files) after exiting i got this: root@debian-kirkwood-wide:~#...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package (Non Flattened Device Tree)
derdigge Wrote: ------------------------------------------------------- > bodhi Wrote: > -------------------------------------------------- > ----- > > derdigge Wrote: > > >...
View ArticleRe: uboot installs, but not environment. should my script mod work in theory?
hey guys, i have the exact same error. # Verifying uBoot environment Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x000c0000 and ending at 0x000e0000... Connecting to...
View ArticleRe: uboot installs, but not environment. should my script mod work in theory?
I was able to "fix" it by getting a cable and using it to manually modify the Arch install. If your uboot installed successfully, and the only issue is a bad block 6 preventing the env install, then I...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package (Non Flattened Device Tree)
I used the "build" script from linux tv git repo here: http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
View ArticleRe: Bricked GoFlex Home? :(
yes, several times. even if i create 1 partition it still says that error. but there is a problem if i start goflex with SATA in i got error in nc log U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate...
View ArticleRe: Bricked GoFlex Home? :(
hmmm... one more try and it loaded with SATA installed. Seems it has that error above, when it can't read from USB stick sometimes, removing and installing usb stick again, solves this. But still with...
View ArticleRe: uboot installs, but not environment. should my script mod work in theory?
nemmy Wrote: ------------------------------------------------------- > hey guys, i have the exact same error. > > > # Verifying uBoot environment > Block size 131072, page size 2048,...
View ArticleRe: Bricked GoFlex Home? :(
dave.opc, Look back what I wrote above: ------------------------------------------------------- > 4. To boot with both drives attached, you will > need to change some uBoot envs. But worry about...
View ArticleRe: Bricked GoFlex Home? :(
Sorry but i am stuck on this step. I did make 1 partition on sata drive using fdisk, used "w" to write changes. then rebooted the device. now to set those envs i should start loading goflex and when...
View ArticleRe: uboot installs, but not environment. [Inactive]
!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!! If you lose power to your device while running this script, it could be left in an unusable state. This script will replace the bootloader on...
View ArticleRe: dpf-ax 0.42: lcd4linux patch removed
I appreciate all the posts in this forum... thanks everyone... Have a good day.
View ArticleRe: uboot installs, but not environment. [Inactive]
The following thread suggests a method for reverting, but I've never done it and I have no idea if it works. Also there is some discussion about future firmware updates from pogo possibly bricking the...
View ArticleRe: Bricked GoFlex Home? :(
With only the USB stick plugged in, boot into Debian, and 1. Use fw_setenv to set uBoot envs the same way you set arcNumber before (put the value in quote if there is space) fw_setenv usb_rootfstype...
View Article