Re: Dockstar can not boot into debian
bodhi Wrote: ------------------------------------------------------- > @david, > > See > http://forum.doozan.com/read.php?2,12875,12877#msg > -12877 bodhi: Thank you so much! I have...
View ArticleRe: Dockstar can not boot into debian
Cool! You could try to fix your old stick now. It is certainly easier to do that since you are in Debian.
View ArticleRe: Can only access to GoFlex Home 3TB with rescue - need help
@servercat, You could mount the stick on another Linux box and convert it to Ext2, it's quite simple to do. Use tune2fs command.
View ArticleRe: Dockstar can not boot into debian
bodhi Wrote: ------------------------------------------------------- > Cool! You could try to fix your old stick now. It > is certainly easier to do that since you are in > Debian. dohdi: Can...
View ArticleRe: Dockstar can not boot into debian
davidnewton Wrote: ------------------------------------------------------- > bodhi Wrote: > -------------------------------------------------- > ----- > > Cool! You could try to fix...
View ArticleRe: Uboot to support different name of uImage
@habibie, Have you tried renaming openwrt-kirkwood-uImage to uImage. And what ever the uInitrd is named in Openwrt, rename it to uInitrd?
View ArticleRe: squeeze install fails on Dockstar, no uImage?
Same here on Pogo E02. Can't seem to find any solution other than building a Linux box (that I don't have) then rebuilding the boot image on the target USB drive?
View ArticleRe: Boot your Dockstar by TFTP/NFS
run fine also with debian jessie (stock kernel 3.9.6.1 from a fresh debootstrap)! going to test if more success with nfsv4 ... root@dockstar2:~# uname -a Linux dockstar2 3.9-1-kirkwood #1 Debian...
View ArticleRe: squeeze install fails on Dockstar, no uImage?
I don't know if this has anything to do with your problem, but on my Pogo E02, which was built initially from a very old version of squeeze, I had to run the command "flash-kernel" after an "apt-get...
View ArticleRe: U-Boot for Device-Tree Kernel
I've finally figured out these netconsle problems in the later uBoot versions and how work around them. Testing with u-boot.2013.07-rc1 1. netconsole input driver seems to regress. Second character in...
View ArticleRe: A new uboot patch to support >2TB HDD?
hello, i don't have yet a hdd>2tb, but i'm going to by one. Somthing is not clear in my mind : uBoot does not support HDD > 2tb or uBoot does not support booting on partition > 2tb ? In other...
View ArticleRe: Uboot to support different name of uImage
Try using symbolic links using uImage and uInitrd as the link name. ln -s openwrt-kirkwood-uImage uImage ln -s openwrt-kirkwood-uInitrd uInitrd Of course you need to rename both the default uImage and...
View ArticleRe: A new uboot patch to support >2TB HDD?
uBoot just hangs if a HDD >2TB is attached during boot process. So yeah, not only it doesn't support booting from from a HDD >2TB, it is completely impossible to use one unless it is connected...
View ArticleRe: A new uboot patch to support >2TB HDD?
@pancho22, Good news! the new uBoot build I just created does work with >2TB HDD. This is when the HDD is attached as a second drive formatted as EXT3....
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Okay really really noob question here. I have a goflex et device the one woth a single sata. Have setitup with arch basic install. Downloaded your debian image with kernel and extracted it to a newly...
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
Since you've installed Arch, your uBoot envs will probably need to be adjusted in order to boot Debian. Please login into Arch, and print your uBoot envs with fw_printenv and post the output here....
View ArticleRe: U-Boot for Device-Tree Kernel
Please see 1st post for an uploaded uBoot image for GoFlex Net.
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
[root@alarm ~]# fw_printenv Warning: Bad CRC, using default environment bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=...
View ArticleRe: GoFlex Home doesn't connect to router / maybe doesn't boot correctly
*bumpp* ... Please? Someone has to have an idea ;->
View ArticleRe: Linux Kernel 3.8.11 Kirkwood package and rootfs (Non Flattened Device Tree)
dheerajjotwani Wrote: ------------------------------------------------------- > [root@alarm ~]# fw_printenv > Warning: Bad CRC, using default environment > bootcmd=bootp; setenv bootargs...
View Article