Re: GoFlex Home doesn't connect to router / maybe doesn't boot correctly
If you are booting with a USB thumb drive, 1st thing to do is to mount that stick to a different Linux box and check for error with e2fsck. You did not say your boot drive was formatted ext2 or ext3,...
View ArticleRe: Uboot to support different name of uImage
Thank you for your suggestion; however, I am not in favor of such an approach, unfortunately. My preference is to have u-boot installation scripts provide an installer/operator an option to enter a...
View ArticleRe: Can only access to GoFlex Home 3TB with rescue - need help
Changing the filesystem was a no go unfortunately. I removed the journal with tune2fs and doublechecked it was ext2 before I tried to boot it. It did not boot. Seems like the only thing that has...
View ArticleRe: Debian Wheezy armhf rootfs and SD card images are here
2G is the image size. You can scale it up using gparted.
View ArticleMy experience with MK808 and MK802
I was interested in installing Debian/Ubuntu on these devices. Because there are so many clones and some of images do not work, I struggled for a while and eventually find some sourses to make them...
View ArticleRe: Can only access to GoFlex Home 3TB with rescue - need help
@servercat, Without seeing your current uBoot envs, it's hard to tell exactly what the problem is. However, I'm guessing: - Since you can only boot from the rescue roofts on a USB stick, it means the...
View ArticleRe: Uboot to support different name of uImage
@habibie, It is possible if Jeff can add this option to his installation script. But this change will effect a lot of sites out there that are using his script to install Kirkwood plugs. Their...
View ArticleRe: dpf-ax: unsupported dpf - requests
I bought this display a while ago: Running on windows - unable to detect flash size Reading 100000 bytes from flash... Flash written to file 'fulldump_win_20130707-235819.bin'. Looking for...
View ArticleRe: Uboot to support different name of uImage
It would be nice if Jeff will add an option to give operator the ability to change the default Linux kernel name (uImage). I am not that familiar with the -boot installation scripts. However, if you...
View ArticleRe: dpf-ax: unsupported dpf - requests
Please try attached fw. Please see if the brightness adjustment works. Yet another one with a weird brightness control routine... Do you have a name or a link to seller / manufacturer? Else it will...
View ArticleMy goflex now stops at "booting kernel"
Hello, I have hacked and now I was using successfully a seagate goflex net with a debian nsa320 image. Now it has stopped working. I "obviously" enabled debugging with netcat and I obtain this log,...
View ArticleRe: Can only access to GoFlex Home 3TB with rescue - need help
bodhi Wrote: ------------------------------------------------------- > [....] > My suggestion: boot into the rescue system on the > stick, and rerun the Debian squeeze installation. > If...
View ArticleRe: Can only access to GoFlex Home 3TB with rescue - need help
servercat, Hmm... Since you are booting with the rescue system on USB, it would be sda1. The install script (squeeze or wheezy) will need to write over the sda1 drive, so it is not possible :) sorry I...
View ArticleRe: My goflex now stops at "booting kernel"
@mgiammarco, Netconsole normally stops the output there (unless you have set up custome boot parameters, or load the module earlier in initrd). Did you try to ssh in? do you use static IP or dynamic IP?
View ArticleRe: My goflex now stops at "booting kernel"
Hello, I have fixed ip. It worked correctly until yesterday. When I tried to ssh it did not reply. So I rebooted it and it never ping/ssh again. I have noticed that, after booting kernel, now the...
View Article10.0 on guruplug missing boot sequence display
This is probably not strictly a Debian question but I have compiled a 10.0 kernel for guruplug. Runs ok except there is no display during the boot sequence when init steps through the run levels Like...
View ArticleA10: Compiling newer mali kernel (!) driver, r3p1???
Hi guys, just a quick question. It seems that Allwinner stayed with the r3p0 mali kernel drivers for a long time now already. No change there for months, while arm already published r3p2-01rel2. Now,...
View ArticleRe: Rescue System
Hi, I managed to boot an a10 flytouch / superpad tablet. however, I noticed it was not always booting , depending on the way I setted up the wifi setup files...why ? I do not have console so I can not...
View ArticleRe: A10 Rescue System
I compiled a brand new kernel with some modules...but how can I upgrade the sdcard to use it ? Regards. steph
View ArticleRe: Dockstar U-boot problem
I have a goflex net and I have the same problem! It worked perfectly for first two weeks then it stopped working. Tried also with arch linux image. Can we join forces? Thanks, Mario
View Article