dockstar sid/jessie usb-root issue
Hi, After upgrading to jessie I am stuck with a non-booting installation. It looks like usb modules are not loaded at right stage during the boot process. I have tried to load the modules manually...
View ArticleRe: dockstar sid/jessie usb-root issue
@tree, What instruction did you use to generate the initrd.img-3.9-1-kirkwood ? was it generated automatically by flash-kernel when you upgrade to jessie? If it was, try to install the kernel deb...
View ArticleRe: Dockstar U-boot problem
Gents, Did you guys try to upgrade your rootfs to wheezy when this happened? If you can recall the event or have a log, it would be easier to figure out what went wrong.
View ArticleRe: Rescue System
Hacking an a10 tablet is extremly painful and sub-standard IHMO mostly causes by insufficient diagnostic means, most particular missing tty lines and an insufficiently documented (i.e. only "leaked")...
View ArticleRe: Dockstar U-boot problem
Here is my sequence: - installed NSA320 boot image on usb - updated - installed iscsi initiator for a test - all ok for one week - added 1tb 2.5 external hdd - modified it to 3049 (not remember exact...
View ArticleRe: Dockstar U-boot problem
mgiammarco Wrote: ------------------------------------------------------- > Here is my sequence: > > - installed NSA320 boot image on usb > - updated > - installed iscsi initiator for a...
View ArticleRe: openVPN setup script
Hey! Have some problems with the script. i installed it but i have no access to the local lan or to the internet. My current config is: IP Dockstar: 192.168.1.2 IP Router: 192.168.1.1 Laptop: tun0...
View ArticleRe: dockstar sid/jessie usb-root issue
Hi bodhi 1. removed flash-kernel 2. ran apt-get update which updated the kernel package to 3.9.8-1 3. executed the mkimage command manually same issue. cheers t
View ArticleRe: GoFlex Home doesn't connect to router / maybe doesn't boot correctly
I double checked that now, it was ext2, and I repaired it. But I still can't get it to work... As said, it seems to not get an IP from my router. But, it seems to boot properly, as far as I can see...
View ArticleUnable to boot Debian on Pogoplug E02
I'm trying to bring up Debian on a Pogoplug E02, and it refuses to boot. Normally I would continue troubleshooting hoping to avoid embarrassment ... but I am waiting for a CA42 and at present have no...
View ArticleRe: Unable to boot Debian on Pogoplug E02
BuckNaked, SSH into rescue system and print out fw_printenv And let's take a look at that. Also, it's best to setup netconsole right after you have a successful Debian installation (in fact, a...
View ArticleRe: Unable to boot Debian on Pogoplug E02
Bodhi, thanks for your reply. I will set up netconsole as soon as I get Debian up. fw_printenv reports: rescue:/# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes...
View ArticleRe: Unable to boot Debian on Pogoplug E02
BuckNaked, Try these possible solutions in this order. If one did not work, try the next. 1. Take the USB Debian stick to another Linux box and change it to Ext3 if it was Ext2. Your uBoot env...
View ArticleRe: GoFlex Home doesn't connect to router / maybe doesn't boot correctly
@fly & davidnewton, See this post: http://forum.doozan.com/read.php?2,12933,12936#msg-12936
View ArticleRe: Unable to boot Debian on Pogoplug E02
Will do. I don't have a Linux system or a system drive ready to go ... I shipped my Neoware thin clients out as web servers ... so I'll need to download a live distro to do the ext3 conversion. I...
View ArticleRe: dpf-ax 0.42: lcd4linux patch removed
Nice surprise about this shorter form. Can you tell us what it is you are talking/writing about?Has any info. about this shorter form been posted before (and i just missed
View ArticleRe: Dockstar U-boot problem
bodhi Wrote: > > I assumed you've rebooted after changing arcNumber > to 3089 ? > Yes I rebooted and I was happy to see that it recognized my hdd > > - all ok for two days > >...
View ArticleRe: Booting Debian on Pogoplug Pro
Hi folks, I've set up a complete guide on how to create a Debian Squeeze rootfs from scratch via debootstrap, merging information from this thread and various other tutorials and completing it with a...
View Article