Re: Rescue V2.8.2 : many enhancements + full kernel support for...
Excellent update. Just finished updating a couple of GFH devices with no issue. Was by far the easiest way to partition a 3TB drive for Arch. I tried several times attaching to Ubuntu. Booted to the...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
ES, First try unplug the power, plug it in and watch serial console to see if it comes up. If it does not, then try UART booting (the first link).
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
Hi Bodhi, I trying to find a kwboot precompiled for x32 Ubuntu... NO LUCK! help please regards, ES.
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
Bohdi, I managed to find kwboot but it loops and don't do much ... restart goflex net and do not send the boot message Sending boot message. Please reboot the target.../ ????? can I put it to bin ?...
View ArticlePogoplug E02, Slow unpacking, Linux Kernel 3.9.11 Kirkwood
I use tarball from this thread http://forum.doozan.com/read.php?2,12096 by bodhi to create a wheezy stick. It booted up fine. However, when I try to install anything by apt-get, the unpacking get...
View ArticlePogoplug E02 booting from ext3 stick
I have a pogoplug E02. I want to boot from a ext3. I changed usb_rootfstype=ext3 with fw_setenv and in /etc/fstab, /dev/root / ext3 defaults 0 1 The kernel log showed ok booting U-Boot 2011.12 (Feb 20...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
@enki, QuoteAfter you booted with UART, then flash that version to mtd0 You should have booted with UART first before attempting anything :) This is to ensure you can boot the image before flashing to...
View ArticleCustom LEDs control.
Hello I have installed debian onto my goflex .net devise. It has one multicolor led used by the device. And it has 2 * 4 cyan leds, used by original firmware to display drive scanning process. I'd...
View ArticleRe: Unable to boot Debian on Pogoplug E02
I'm trying to compile cgminer for a seagate dockstar and I think it has the same processor. Would like to read your guide, but your website seems to be offline :(
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
@enki, I just reread the post above and realized: Marvell>> tftpboot 0x800000 uboot.mrtd0.kwb-2011.12-goflexnet-L2Coff-IDEpatched.tar.gz You did not untar the file? the command should be...
View ArticleRe: Tip: Use wire wrap terminals to connect serial cable
I use this wire wrap tool Radio Shack Wire Wrap Tool
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
Bodhi, Yes, you are right. I ended to write the file untarred file. ;((( As previous I tried to write a kwb image via serial cable with kwboot utility. The thread you have indicated it provides a...
View ArticleRe: Custom LEDs control.
I've solved it. Here is my code in python: def set_led(indicator_name, indicator_number, brightness): dev_name = '/sys/class/leds/status:white:%(indicator_name)s%(indicator_number)d/brightness' % \...
View ArticleOk, So...I KNOW My Pogo is HOSED, here's why:
I have TWO POGO's 1 is the Pogo Ver4 that has the sata and the USB2 on the top. The other is the POGO MOBILE that only has the one USB2 (or is it USB3?) in the back next to the Ethernet Port. Both are...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
enki, You need the -p option at the end. The uBoot image downloaded from Davy is the NAND-ready image. kwboot -t -B 115200 /dev/ttyUSB0 u-boot.kwb -p
View ArticleRe: Howto: Create a rootfs for Debian Wheezy on GoFlexHome
So, some final bits - how to copy the rootfs into UBIFS, this assumes you've got as far as creating the rootfs and are ready to flash it to the device - bear in mind that this information relates...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
http://forum.doozan.com/read.php?3,13261 I'm happy to roll you a GoFlex Net version if you're stuck? The kwboot tool comes with the u-boot source, so if you have the tool chain etc, you can compile...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
I originally used a proper Nokia CA42 cable - struggled to find drivers (did eventually) but I'd already decided to brew my own cable, if you can solder, have a female DB9 connector, then here's the...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
Dear Majic: Well that's what I thought I bought from Rakuten (formerly Buy.com) -- A Nokia CA-42 cable...and it looked like the cable, and it even had the ends like a nokia and everything... But in...
View Article