Re: Ok, So...I KNOW My Pogo is HOSED, here's why:
By the way....because of the "buds" on the Pogo Boards instead of a proper connector.... wouldn't it be a good idea to solder a USB-A receptacle to the "buds" and then dremel the sidewall to fit the...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
> > Any help you could offer me would be greatly > appreciated. > You could build your own serial console cable using any Linux embedded system. Sometimes ago, I saw this article to turn a...
View ArticleRe: My experience with MK808 and MK802
Please let me know if it works for you. I have repeated the same procedure on 802ii and everytime it always works. However, it is a different story on 808. My previous installation still works but...
View ArticleRe: Zyxel NSA320 : basic support for Debian installation
Hello again guys, thank you very much for your answers, and sorry for my late reply. But I have been out of town for a while, and I will be for another week. I'll try right after I'm back, and I'm...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
At home I'm almost exclusively using Debian (I have dual boot and Win7 x64 on another drive, but I only ever start it up if I want to play games or test something else), at work I have to use Windows...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
No offence, but why do you bother him with schematics for serial converter boards and soldering this and that, when you can get a decent usb to serial converter board (PL2303) from Asia for about...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
@bodhi, I will try kwboot with -p option. @majic79, Thank you for your availability to share a kwb image for GoFlex Net. I will try this evening to do a 'make tools' for kwboot. I am looking forward...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
enki, I think if you run your Ubuntu 32 version with the -p option it will work.
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
@majic79, The page you have indicated me to assist me in building an u-boot.mtd0.wkb is for GoFlex Home and not for Net. Can you please help with an u-boot.mtd0.wkb image for GoFlex Net? And something...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
@enki, You don't need new uBoot image. The one you download should work perfectly. You only need a way to run kwboot to boot UART with this image. Have you tried that Ubuntu 32 kwboot with -p parameter?
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
Bodhi, I have tried the kwboot I have (attached below) with option -p without much luck... it seems it doesn't send the .kwb to goflex net. ;( It might be the case my goflex net is has that bootroom...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
enki, The GoFlex Net works with UART booting. I used UART booting on GoFlex Net to test uBoot builds. I've never seen any report that certain GoFlex Net version has different bootrom. Chance is that...
View ArticleRe: Pogoplug E02 booting from ext3 stick
Have you verified that your root filesystem is indeed an ext3 filesystem?
View ArticleRe: Tip: Use wire wrap terminals to connect serial cable
laprjns Wrote: ------------------------------------------------------- > I use this wire wrap tool > [url=http://www.radioshack.com/product/index.jsp?p > roductId=2103243]Radio Shack Wire...
View ArticleBD Main Movie Backup: Backup Blu-ray Main Movie with ByteCopy
BD Main Movie Backup: Backup Blu-ray Main Movie with ByteCopy Summer holiday has already begun and you may wonder going traveling with friends is just an attractive thing for relaxing. In order to...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
ingmar_k Wrote: ------------------------------------------------------- > No offence, but why do you bother him with > schematics for serial converter boards and > soldering this and that,...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
I'll update the thread with instructions for the GoFlex Net and build you one at the same time - it will be largely untested (I don't have a GFN to test with unfortunately) but the instructions ought...
View ArticleRe: Ok, So...I KNOW My Pogo is HOSED, here's why:
I didn't say you shouldn't share. I think it's very nice that you did. Don't get me wrong. ;-) I solder something nearly every day and layouted my own usb to serial converter pcb and so on. The point...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
majic79 Wrote: ------------------------------------------------------- > I'll update the thread with instructions for the > GoFlex Net and build you one at the same time - it > will be...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
If you're building from the 2013.07 u-boot sources, then just build "make tools" - you'll get a kwboot compiled for your system in the tools/ directory, I've been using the following commands to build...
View Article