Re: Booting Debian on Pogoplug Pro
Please check first if the partition name is "rootfs". If it doesn't boot you might have the latest kernel of WarheadsSE. In this case you could try my Debian rootfs which fits to that kernel: Link....
View ArticleRe: Booting Debian on Pogoplug Pro
Sorry, I needed to wait for my router's dhcp table to refresh. After 15min or so it appeared and I now have SSH access to my pogo with debian. Thanks.
View ArticleRe: GoFelx-Net without SATA device
Isn't definition of ide_root_label is missing? ide_root_label=rootfs
View ArticleRestarting of nfs-kernel-server by udev event during booting
I am using an udev configuration which restarts the nfs-kernel-server after disks are mounted. Now I got a problem that this stops the system startup. Synthesizing the initial hotplug events...done....
View ArticleuBoot for Ix2-200
I was just wondering if anyone could give me any pointers or if someone that knows how, could tell me how to go about compileing a new uBoot for the iomega storecenter ix2-200. I have it running arch...
View Articleget usb sound support in varkey's rootfs
I am running varkey's rootfs on my pogoplug b04 (http://forum.doozan.com/read.php?3,6336,6371#msg-6371) I want to use my usb soundcard so I can use pogoplug as audio streamer. But the usb sound module...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
It doesn't solve the problem while scanning of USB devices: scanning usb for storage devices... EHCI timed out on TD - token=0x82008d80 EHCI timed out on TD - token=0x1f8c80 EHCI timed out on TD -...
View ArticleRe: get usb sound support in varkey's rootfs
mk2k, Since you're running the Arch kernel on NAND, the modules that are actually loaded are Arch's (in /lib/modules/2.6.31.6_SMP_820/kernel/). So if you can find that module in your Arch rootfs, just...
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
shv Wrote: ------------------------------------------------------- > It doesn't solve the problem while scanning of USB > devices: > > scanning usb for storage devices... EHCI timed >...
View ArticleOk, here's an update!
Got the Delivery from Banggood.com, took 14 days from Hong Kong. Anyway, plugged it into the Win 7 computer....and it was coming up a code 31, then I fiddled around with the earlier versions of the...
View ArticleRe: uBoot for Ix2-200
Buttzy10169, QuoteI have it running arch linux and debian (whichever i want at the time) and can use the latest 3.10.10 kernel with device tree. You are running a quite recent uBoot if you can run...
View ArticleRe: Tip: Use wire wrap terminals to connect serial cable
Anybody knows what is the number for wire wrap terminals that are smaller than the T46? TIA
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
I use "usb reset; usb start;" once. Do you think it could help to put "usb start" as first option in "preboot" before the neconsole part?
View ArticleRe: Replace Ubit v0.5 with Uboot and a good kernel for GoFlex Net
I don't think it will matter whether it's before the preboot. How about where in the uBoot envs you have 'usb start'. For example, change this bootcmd=usb start; run force_rescue_bootcmd; run...
View ArticleRe: uBoot for Ix2-200
it looks right im not near the device at the minute so not fully sure if its the same. its whatever the stock uboot is anyway. i build the kernel then append the dtb to it and compile the uimage and...
View ArticleRe: get usb sound support in varkey's rootfs
bodhi, thanks for your suggestion. I copied over the modules, but got an error,so I also need the ARCH linux source, since I downloaded the debian source which is wrong. I get wrong module version...
View ArticleRe: Crashplan on PogoPlug
Is there any new development regarding installation of crashplan on Arch Linux Pogoplug E02 ? Anyone found openjdk6 package for Arch linux and willing to share it ? Anyone installed crashplan with a...
View ArticleRe: Crashplan on PogoPlug
Not that I know of, and I doubt we can expect anything from crashplan. Regardless, I'm still running crashplan on my Pogoplug using the above mentioned script.
View ArticleRe: Booting Debian on Pogoplug Pro
I followed instructions to install debian on pogoplug V3 but when I SSH into it. It doesnt accept default user password. How to fix it?
View ArticleRe: Booting Debian on Pogoplug Pro
Ubaid Wrote: ------------------------------------------------------- > I followed instructions to install debian on > pogoplug V3 but when I SSH into it. It doesnt > accept default user...
View Article