Re: Serial Port connector - what are people using to make it work?
That should work. But cost a lot more than one without the cover on eBay. They all come from China so it will take the same amount of time to get to where you are!
View Articleclean the camera
Gibberish did not say more, we directly into today's topic -- clean the camera. The thought of "cleaning up the camera" four words almost crying. In order to prevent the destruction of the world, in...
View ArticleRe: dpf-ax: unsupported dpf - requests
Hi! I have a keychain picture frame that i bought on Media Markt in Sweden, it's called COBY DP151 (151BW). And it does not seem to have any matching Firmware. [sudo] password for maria: Detecting...
View ArticleRe: ZyXEL NSA320 For $70 End today
nsa320 Now is $60 NSA320(rakuten) If you are member of rakuten(Buy.com) they give you 1000 super point (which is $10) so total cost should be around $50 if you pay by CC
View ArticleRe: Adding Wifi to GoFlex Home
I'm interested... i came over here from archlinux cause they all seem to be royal ahem... any way i'd gladly take a small role i cannot fulltime mod but i have alot of free time :)
View ArticleRe: dpf-ax: unsupported dpf - requests
@superelchi Yeahhh! Thanks! Only backlight seems a bit odd... But I don't think the original firmware even let me control backlight (only contrast). :) What can I do with display now?
View ArticleRe: dpf-ax: unsupported dpf - requests
maria Wrote: ------------------------------------------------------- > Yeahhh! Thanks! Only backlight seems a bit odd... > But I don't think the original firmware even let > me control...
View ArticleRe: dpf-ax: unsupported dpf - requests
It goes up and down, and I do not see any real pattern in it's behavior. Not much difference between steps either. Even at setting 1 it's well lit. Subjective list: 1: 2: up 3: up 4: up 5: up 6: up 7:...
View ArticleRe: dpf-ax: unsupported dpf - requests
Looks like the brightness adjustment of this lcd is crap. Had a closer look at the brightness adjustment - seems only values 0 - 8 are useable at all. Please try attached fw. superelchi
View ArticleRe: dpf-ax: unsupported dpf - requests
Yea, that works much better. :) But as you say, brightness adjustment on the LCD is probably crap, because there is almost no difference between steps or even the between 1 and 8. :) Thanks! :)
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
bohdi, I currently am able to successfully boot and run Debian from a 4G SD card. However when I changed to a 16GB Lexar SD card I get intermittent results. Mostly not-good. I ususally get "mmc block...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Geo, Quoteboot the kernel and or ramdisk. The MMC driver in uBoot seems to have problem with some SD cards. Might be the timing setings was too short and it's timed out too quickly. Exactly what point...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
how can i get the hdd led's working on the nsa320, ide-trigger doesn't seem to work any more.
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
fma965 Wrote: ------------------------------------------------------- > how can i get the hdd led's working on the nsa320, > ide-trigger doesn't seem to work any more. There is so little info in...
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
I was not able to recreate the exact scenario but it seems if the hardware is off overnight (i.e cold) it can reboot. Today I was able to boot from a 4Gi and then swap cards after it loaded uImage and...
View ArticleRe: Linux Kernel 3.12.0 Kirkwood package and rootfs (Non Flattened Device Tree)
bodhi Wrote: ------------------------------------------------------- > fma965 Wrote: > -------------------------------------------------- > ----- > > how can i get the hdd led's working...
View ArticleRe: Go Flex Home, Won't Boot Anything, No Serial, HELP!
sorry late reply, since i got a nsa320 not bothered checking on the go flex home, however now i can confirm the serial adapter does work as i use it on the nsa320, thanks.
View ArticleRequest - Need STOCK uBoot for Zyxel NSA320
Hey guys basically as the title says, i need the stock uboot from a nsa320, can some one extract it and upload it for me, thanks.
View ArticleRe: U-Boot w/ MMC/SD-card booting for Pogoplug Series 4
Geo, I did not see anything peculiar other than the read errors. Have you tried to reformat the 16GB card? (ie. on Windows or Mac).
View Article